Saving to a SD Memory Card, Recalling
Formatting the SD Memory Card
All data is erased and the SD Memory Card is formatted. Useable capacity will be less. Useable capacity may differ from that indicated on the media.
Use only when you want to erase all files or when there is data on the card that cannot be read.
Panel data automatic loading (TURNTABLE mode only)
The unit automatically loads panel data for each CD or SD Memory Card to its memory from the SD Memory Card.
1.Switch [PLAY SELECT] to select the media to be used and turn the MODE switch on the rear panel to TURN- TABLE side
2.Insert the SD Memory Card containing saved panel data
3.If the media corresponding to the saved panel data is a CD, insert the CD
•If the same media data exists on the SD Memory Card and in the unit’s memory, the SD Memory Card takes precedence and the unit’s memory is overwritten.
If you do not want to replace data in the unit’s memory, save to a SD Memory Card in advance.
Regarding MP3 albums and SD audio
Selection and play order of tracks within an MP3 album
•For MP3 tracks on
Play order
1 | Insert the SD Memory Card ( page 10) |
2 | Hold down SD CARD [SAVE] for more |
| than 5 seconds until “FORMAT OK?” |
| appears in the display |
3 | •Press [SAVE] again to cancel. |
Press [EXECUTE] to proceed | |
| •“COMPLETED” will appear on the display. All data is erased |
| and the card is formatted. |
| •If “FORMAT ERROR” appears in the display, this SD Memory |
| Card cannot be formatted. |
|
|
| Recalling (loading) data saved on a |
| SD Memory Card |
Loading sample pad data |
Root
001
002
003
Naming folders and files
At the time of recording, give folders and file names with
001ABCDE.mp3 | 1st track |
002FGHIJ.mp3 | 2nd track |
003KLMNO.mp3 | 3rd track |
004PQRST.mp3 | 4th track |
001A_123.mp3 | 5th track |
002FG_12.mp3 | 6th track |
003KLM_1.mp3 | 7th track |
001VWXYZ.mp3 | 8th track |
functions | You can recall sample pad | |
1 Insert the SD Memory Card containing | ||
Other | ||
saved data ( page 10) | ||
2 Load the file | ||
| ||
| 1. Press SD CARD [LOAD] | |
| •The LOAD lamp lights. “SD LOAD” screen appears in the | |
| display. | |
| •The S.PADS lamp lights. | |
| 2. Press [– + BANK] to select the file | |
| •Press and hold [– + BANK] to load in high speed. | |
| •Display of the selected file is reversed. | |
| (File example) 001ABCDE, 002FGHIJ... | |
| •Press [LOAD] again to cancel. | |
| 3. Press [EXECUTE] | |
| •The media begins to load, “NOW SD LOADING” appears | |
| in the display. Loading may take up to 25 seconds. | |
| •The LOAD lamp goes out once loading has finished and | |
| “COMPLETED” appears in the display. |
•Pressing [LOAD] during play, displays a warning message and play continues.
•Previous sample pad data is erased from memory on this unit once loaded.
22
Folders can be created within folders, however the play may not proceed in the correct order.
•Only MP3 files are playable when there are files other than MP3 files on the
Creating MP3 files for play on this unit
•The format used for
•When creating on a computer etc, give folders and files names using numeric and alphabetic characters.
•Read the operating instruction manual if using MP3 file creation software on your computer. Depending on the type of recording, some MP3 files may not be playable.
•Only ID3 tag track titles are displayable on this unit. V1, V1.1 (Up to 32 alphanumeric characters.)
•This unit is compatible with
•You cannot play a file that was recorded with packet write.
•This unit is not compatible with HighMATTM.
Creating SD audio for play on this unit
Record tracks to a SD Memory Card using only the “SD JUKE- BOX” application for recording SD audio for your PC, and a USB
•This unit is not compatible with the WMA format.
RQT7114