Sprint Nextel PPC-6700 manual Using Camera and Camcorder, Use the Camera, To exit the Camera

8.1 Using Camera and Camcorder

Taking photos and recording video clips along with audio is easy with the device’s built-in camera.

To switch to any of the Camera modes:

Tap Start > Programs > Camera.

Tap Start > Programs > Pictures & Videos > Camera icon.

Press and hold the CAMERA button for two seconds.

To exit the Camera:

Tap the exit icon ( ).

Press the OK button.

Use the Camera

The camera on your Sprint PCS Vision Smart Device allows you to capture pictures and video clips by using various built-in modes with flexibility. The Camera mode is set to the Photo capture mode by default. The lower right corner of the screen displays the active capture mode. To switch to other capture modes, do any of the following:

Tap or on the screen.

Press NAVIGATION left or right.

The available capture modes of the camera are as follows:

Photo: Captures standard still images.

Video: Captures video clips, with or without accompanying audio.

Contacts Picture: Captures a still image and gives you the option to immediately assign it to a Photo ID for a contact.

Picture Theme: Captures still images and places them within frames.

112 Section 8: Experiencing Multimedia