Siemens S40 manual Phone setup

Page 33

62

Setup menu

Setup menu

63

Phone setup

First

Enter the Setup menu by pressing »MENU«

Select »Phone setup«

Language

Select »Language« to change the menu language of your phone.

IrDA

Under »IrDA Nickname« you can enter an ID name by which you want other IrDA devices to identify your mobile phone.

By selecting »Printer« and then »Setup« you get the option to define the protocol language of the printer you want to use.

If you select »Test page«, a stan- dard test page will automatically be sent to the printer.

Backlight

To save your battery and thus increase both conversation and standby times you can choose to have the backlight permanently switched off.

Handsfree (Car kit & headset)

This option is effective only if your phone is connected to a handsfree device. See specific user guides for further information.

Greeting

Make a welcome greeting on your phone according to your own wish- es. Press »EDIT« and delete the old greeting by holding down »CLEAR«. Enter the new greeting via the keypad, and confirm by pressing »OK«. (This function may not be available on all networks).

Signal diode

The LED on the top of the phone

provides information about the fol-

lowing:

•Green flash

In contact with a network

•Fast green flash Incoming call

•Very fast green flashes New information, e.g.

a missed call or a new message.

•Red flash

No contact with a network

•Fast red flash Low battery

Select individually whether you want these indicators to be active or not.

Graphics

This submenu allows you to choose between different symbols for the battery and the signal strength indicators.

This is also where you adjust the contrast of the display.

Owner ID

You can store an owner ID in your phone to be shown when you switch on the phone. Select »Define« to enter the necessary information, which corresponds to an address book entry. You can also select an entry from your address book or one of your phone books to be stored as your owner ID.

Select »Show at power up« to activate/deactivate the function. When the function is activated press »OWNER« during the power up phase to see the contents of your owner ID.

You can change an existing Owner ID by selecting »Edit«.

The contents of the Owner ID can be sent as a business card via IrDA (see p. 39).

Facts & Tips

•If, by mistake, you select a language which you do not understand, you can always return to the original SIM card language by pressing the following

keys: 0000 , in standby mode.

•When you change the menu lan- guage of your phone, it is advisable to change the keypad language accord- ingly.

•The owner ID is stored in the inter- nal memory of the phone and will thus not be shown in the display if you use your SIM card in another phone.

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Ref. No. A31008-H6400-A19-1-4A19 S40S40Setup menu Siemens serviceMenu overview List menuContents Exposure to radio frequency signals Important safety instructions TIA Safety languageAntenna care Phone operationAircraft Electronic devicesBlasting areas For vehicles equipped with an air bagCtia Driving safety tips Information on SAR Getting startedInsert battery Charge batteryRemove charger Calling SIM cardInsert SIM card Making a callAddress and phone books Silent modeRedialing a number Keypad lockWheel mode Using the keypadGrid mode Text inputPhone books Address bookFinding an entry in your Address and phone books Barred numbersBoth address and phone books Prefix phone numbersList menu Reset phone memoryList menu Call lists Address and phone book editing Direct access to the list Missed callsOptions in call lists Add entryGroups Options in groupsCreate new group Add to group StatusVoice Memo CalculatorDelete all memos Enter this sub Key OperationCalendar Being notified of an eventPostponing an event IrDA operation Missed eventsWAP browser Messages Direct access to your inboxAbout Phone.Com AdvancedDelete it Send as SMSSend via IrDA T9text input feature Setup menu Setup menu Register your call divert Call divertDeactivation/activation Different options of call divertDifferent options for call barring Call barringActivate your call barring Call waitingSet preferred list Selection modeCountry selection Network typesRinging tone Message tone Broadcast tone Tones setupComposer Display indicationsDelete Factory settingsKey tone TremblerPhone setup Call setup Send SMS setup Message setupCall types fax/data Line selectionSorting Broadcast setupText input setup Calendar setupSecurity Line lock Conversation menuConversation menu Further information Keypad functions Display symbols Declaration of Conformity Technical specificationsWhat kinds of phones are Question? Why the concern?Safety of mobile phones? What is FDA’s role concerningWhat is known about cases Human cancer that have beenWhere can I find additional infor Mation? Accessories Original Siemens accessoriesIndex SMS IndexUssd
Top Page Image Contents