84
Technical specifications
Further information
Further information | 85 |
Declaration of Conformity
This product uses frequency bands whose use is harmonized within the European Community area. This product is intended to be connect- ed to the GSM public telecommu- nications network.
•GSM900 Class 4 (2 Watts) Frequency range
•GSM1800 Class 1 (1 Watt) Frequency range
•GSM1900 Class 1 (1 Watt) Frequency range
Weight:
97 g
Size:
112 x 44 x 22 mm
Operating voltage:
3.7 V
Power consumption:
Max. 650 mAh
Operating temperature:
Standby time:
Up to 260 hours
Talk time:
Up to 360 minutes
Battery warnings:
•Never charge your battery when the ambient temperature is greater than 104 degrees fahrenheit (40 degrees Celsius).
•To prevent injury or burns, NEVER allow metal objects to contact or short circuit the battery terminals.
•Never dispose of your battery where it will be exposed to fire.
•Always dispose of your battery in accordance with local laws and reg- ulations.
•Temperature extremes will
•The capacity and lifetime of your battery will be reduced by leaving it in hot or cold places, such as in a closed car in summer or winter conditions.
Licenses:
T9 Text Input® is a registered trademark of Tegic Communi- cations.
T9 is licensed under one or more of the following U.S. Patents: 5,818,437, 5,953,541, 5,187,480, 5,945,928, 6,011,554 and additional patents are pending worldwide.
Your WAP browser is licensed from:
Any attempt to modify, translate,
We,
Siemens Mobile Phones A/S
Industrivej 30
Denmark
declare under sole responsibility that the product:
Siemens S40
manufactured by
Flextronics International Danmark A/S
Industrivej 30
Denmark
to which this declaration relates, is in conformity with the following standards and/or other normative documents:
•EN 301
•EN 301
•Draft EN 301 511
•EN 60 950
•ETS 300
•ES 59 005 (following the provisions of EC Council Recommendation 1999/519/EEC)
We hereby declare that tests have been conducted, test results evaluated and that the above named product is in conformity with the essential requirements of Directive 1999/5/EEC.
The conformity assessment procedure referred to in Article 10(5) and detailed in Annex V of Directive 1999/5/EEC has been followed with the involvement of the Notified Body:
BABT
Claremont House
34 Molesey Road
KT 12 4RQ
United Kingdom
Identification mark: 0168
The technical documentation relevant to the above equipment will be held at
Siemens Mobile Phones A/S
Industrivej 30
Denmark
Pandrup, October 16, 2000
Oluf Kristensen | Manfred Heier |
Regulatory Affairs | Managing Director |