Siemens S40 manual Message setup, Call types fax/data, Line selection, Send SMS setup

Page 35

66

Setup menu

Setup menu

67

Call setup

First

Enter the Setup menu by pressing »MENU«

Select »Call setup«

Call types (fax/data)

This menu is relevant only if you are using your phone for fax and data communications!

The settings on this menu should be changed only in connection with fax and data transmissions, if ne- cessary.Fax and data transmissions can be made via IrDA or by means of a separate data cable (optional).

At www.siemens.com/s40 you will find a modem setup pro- gramme enabling you to change the receiving data transfer speed into high speed (HSCSD).

Line selection

Some network operators offer Alternate Line Service. This allows you to use two separate speech lines and phone numbers on the same telephone. If you have two separate lines, you can switch between these by entering this sub menu

Facts & Tips

• Fax transmission supported is Fax Class 1.

• When your phone is connected to a data cable it is not possible to send and receive via IrDA.

• In the standby display a small num- ber on the left or right-hand side of the signal strength indicator informs you whether you are on line one or line two (only if you have Alternate Line Service).

Message setup

First

Enter the Setup menu by pressing »MENU«

Select »Message setup«

Send SMS setup

To be able to send and receive SMS messages you must store the name and number of the service centre of your network operator. However, many network operators will already have stored this infor- mation and some other necessary parameters for you on your SIM card.

Service centre The service centre is where your SMS messages are forwarded to the recipient. Select- ing this submenu gives you the fol- lowing options:

View centres: A list of already defined service centres will be pre- sented to you. Press »OPTION« if you want to edit or delete one of the service centres.

Under the edit option you can change the name and number of the service centre, enter a destina- tion number to which you want your messages to be sent, change the validity time and teleservice type.

Add new centre: Contact your net- work operator to get the service centre number if it is not stored on your SIM card, and then proceed as follows:

Select »Add new centre« and press »OK«.

Press »EDIT«.

Enter the service centre name and press »OK«.

Enter the service centre num- ber, destination number, and select the validity time and teleservice type in the same way.

Press »SAVE«.

Default centre: Select the service centre through which you want your messages to be sent. If you select »No default«, you will be asked to enter the service centre number, validity time and teleser- vice type each time you send a message.

Facts & Tips

•Remember to add "+" and the national code before the number of your service centre so you can also send SMS messages from abroad.

•If you often send messages to the same number it is an advantage to store this as your »Destination num- ber«. You will thus only have to con- firm and not reenter the number each time you want to send a message.

•The validity time is the period of time that an SMS message will remain with your service centre if for some reason it cannot be delivered right away.

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Ref. No. A31008-H6400-A19-1-4A19 S40S40List menu Siemens serviceSetup menu Menu overviewContents Phone operation Important safety instructions TIA Safety languageExposure to radio frequency signals Antenna careFor vehicles equipped with an air bag Electronic devicesAircraft Blasting areasCtia Driving safety tips Information on SAR Getting startedRemove charger Insert batteryCharge battery Making a call SIM cardCalling Insert SIM cardKeypad lock Silent modeAddress and phone books Redialing a numberText input Using the keypadWheel mode Grid modePhone books Address bookPrefix phone numbers Barred numbersFinding an entry in your Address and phone books Both address and phone booksList menu Reset phone memoryList menu Add entry Direct access to the list Missed callsCall lists Address and phone book editing Options in call listsCreate new group GroupsOptions in groups Add to group StatusKey Operation CalculatorVoice Memo Delete all memos Enter this subPostponing an event CalendarBeing notified of an event IrDA operation Missed eventsWAP browser Advanced Direct access to your inboxMessages About Phone.ComSend via IrDA Delete itSend as SMS T9text input feature Setup menu Setup menu Different options of call divert Call divertRegister your call divert Deactivation/activationCall waiting Call barringDifferent options for call barring Activate your call barringNetwork types Selection modeSet preferred list Country selectionDisplay indications Tones setupRinging tone Message tone Broadcast tone ComposerTrembler Factory settingsDelete Key tonePhone setup Call setup Line selection Message setupSend SMS setup Call types fax/dataSorting Broadcast setupText input setup Calendar setupSecurity Line lock Conversation menuConversation menu Further information Keypad functions Display symbols Declaration of Conformity Technical specificationsWhat kinds of phones are Question? Why the concern?Human cancer that have been What is FDA’s role concerningSafety of mobile phones? What is known about casesWhere can I find additional infor Mation? Index AccessoriesOriginal Siemens accessories SMS IndexUssd
Top Page Image Contents