68 | Setup menu |
Setup menu
69
Message setup
First
Enter the Setup menu by pressing »MENU«
Select »Message setup«
Send SMS setup (Continued)
Reply path 
For messages that have to be sent to the recipient via several service centres, some net- works offer the feature of forward- ing a reply, if any, back to you through the same chain of service centres. This is called a reply path, and activating it may speed up the delivery time for a reply.
Contact your network operator for further information.
Confirmation 
Select »Confir- mation on« if you want a confirma- tion from the network operator when your message has been sent to the recipient.
If the message has not been sent you will get the information that it is either queued or not delivered.
The period during which you can receive this kind of confirmation corresponds to the validity time selected by you in the Message setup menu.
Signature You can add a signature to be sent automatically at the end of your SMS messages.
Broadcast setup
To be able to receive broadcasts you must enter Broadcast setup which gives you the following options:
Activation Select whether you want the broadcast function to be activated.
Channels Set up a list covering the kind of information you wish to receive. The phone will show you various options for storing the indi- vidual channels.
Pressing »EDIT« will give you a range categories from which you can select the one(s) you want to receive.
Language 
Some network opera- tors offer broadcast messages in different languages. Select between different languages or simply select all languages.
Sorting
Specify whether your messages in your inbox, outbox or sent items should be sorted by date and time, by subject or by sender.
Facts & Tips
•For more information on broadcasts, see p. 48.
Browser Menu
The connection to the WAP gate- way is established as a data call via an access point. You must enter the dial number of this access point in the »Profile setup« below.
Communication between the access point and the gateway takes place automatically when you have entered the IP address of the gateway as mentioned below.
It is likely that your network oper- ator has already stored this infor- mation in your phone. If not, you must select the “Profile setup” menu and enter the data yourself.
Display setup Select whether you want the title of the displayed card to be shown in the first line of the display or not.
Profile setup This is where you set up your WAP connection. You can store up to 8 different profiles, each with an individual setup.
•Add profile: Select this submenu to add a new profile. Enter any of the following parameters:
Note: The minimum number of parameters required are
•The name of the profile
•The supplied
•The connection type (analog or ISDN)
•The data speed (9600 or 14440)
•The supplied user name
•The supplied password
•The IP address (use the 
- key for decimal commas)
•The port number
•The name of your Homepage for this profile. (Like the start page on your PC).
•The idle time. Set the period (in seconds) after which you will be disconnected after your last key- stroke.
•View profiles: Select this sub- menu to view any stored profiles.
Press »SELECT« to view the con- tents of a specific profile.
By pressing »OPTION« you can choose to edit or delete the select- ed profile.
Facts & Tips
•Contact your network operator or special WAP gateway provider for fur- ther information on how to set up the WAP browser.
•Permission to view, add or change the WAP profiles might be restricted by your network operator.