Siemens SL45i, SL42 manual 66Setup, Network

66Setup

Menu ! Setup !

Security !

then select a function:

PIN control

The PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorised use of the phone. Some Service Providers do not permit this function.

Prevent new SIM

(Phonecode)

Your phone is prevented from operating with a different SIM card.

Pin change

PIN 1

You can change the PIN to any

4 - 8 digit number (i.e . a number you may find easier to remember).

JEnter old PIN.

OK Press.

J/ OK Enter new PIN.

J/ OK Repeat new PIN.

PIN 2

You can change the PIN 2 to any 4-8 digit number (displayed only if PIN2 is available).

Proceed as with PIN 1.

Phonecode

You can also change the phone code

to any 4 - 8 digit number. Proceed as with PIN 1.

Network

Menu ! Setup ! Network !

then select a function:

Connection

~

This function is only displayed if it is supported by the Service Provider.

Two independent phone numbers must be registered on the phone.

Select

Select the phone number to be used.

If you change frequently, it is more convenient to make the selection using the soft key (see p. 71).

LDisplay the active phone number.

Special settings can be made for each phone number (melody, call diversion etc). Switch to the required phone number first.

To switch the phone number/line: (in standby mode)

0Press, then:

Line 1 Press.

Lock

(Phonecode)

You may limit usage to one phone number.