Siemens SL42, SL45i manual Setup69, Dial-in Access-Menu Options, Java, Standard

Setup69

Menu ! Setup ! Network !

then select a function:

Dial-in Access

A Dial-in Access must be defined to use WAP and thus Java™. A maxi- mum of 5 dial-in accesses can be de- fined. Normally these settings are al- ready made by the Service Provider, and they might only need to select one Dial-in Access.

New entry

If no Dial-in Access is available, se- lect New entry in the empty list and

enter the following parameters (CSD Settings):

Profile Give the Dial-in Access

name: a name or overwrite a default name.

Dial-up no.: Enter node dial-in number (ISP).

Call type: Select ISDN or ana- logue.

Login-name:Enter user name (login name).

Password: Enter password (hidden display).

Linger-time:Enter time in seconds after which a connec- tion should be ended if there is no input or data exchange.

Save Store entries for the Dial-in Access.

Dial-in access numbers for WAP are not normally suitable for Java™ (depending on the Service Provider). All Dial-in Access numbers that you use for the fixed network Internet (WWW, HTTP) can also be used for Java™. Under certain circumstances, therefore, it may be necessary to use two different Dial-in Access numbers for WAP and Java™.

You can also find WAP or dial-in parame- ters on the product CD in the WAP_OTA di- rectory or on the Internet at:

www.my-siemens.com/sl45i

Dial-in Access-Menu Options

Various functions are possible de- pending on the situation:

New entry	Generate new entry.
Delete	Delete selected entry.
Delete all	Delete all profiles.
Java	Define a Dial-in Access
standard	as standard for the
	Java™ download func-
	tions. This access is in-
	dicated with a coffee
	cup in the list. You can
	also define a separate
	Dial-in Access for indi-
	vidual Java™ applica-
	tions (p. 39).