Siemens AX72 manual Calling

left page (10) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)

VAR

Language:	10	Calling
	Change phonecode		Short press §Clear§ to clear the last digit, a
en; VAR
	You define the phone code (4-8 digits)		long press clears the entire phone
	when you call up a protected function for		number. To dial press the Call key A.
issue	the first time. It is then valid for all phone-		End call
	code protected functions. If the wrong
date:	code is entered three times then the		Press the End key B briefly. Press this
	phone will be locked. Contact Siemens		key even if the person on the other end of
	Customer Care for instructions on how to		the line has hung up first.
050613
	unlock your pone.		Set volume
	Clear SIM card barring
			Use navigation key E to start adjusting
	If the PIN is entered incorrectly three		the volume during conversation. Set vol-
	times, the SIM card is barred. Enter the		ume with navigation key	G	.
	PUK (MASTER PIN), provided by your serv-
			If a Car Kit is used, its volume setting will
	ice provider with the SIM card, according
			not affect the usual setting on the phone.
	to instructions. If the PUK (MASTER PIN)
			Redial
	has been lost, please contact your service
	provider.
			To redial numbers that were dialled previ-
	Preventing accidental activation
			ously, press the Call Key Aonce, pick up
	Even if PIN control is deactivated confir-		the required phone number from the list
			with G, then press A again.
	mation is required to switch on the phone.
			If the number is busy
	This prevents the phone from being
	switched on accidentally, e. g. when car-		Press §Auto dial§ for automatically dialling
	ried in a pocket or whilst you are on an
			the phone number ten times at increas-
	aircraft.
			ing time intervalls or press §Call back§ (L)
	Press and hold the On/Off/End key B
			for phone ringing when the busy number
	and confirm with §OK§. The phone		is free. Press §Prompt§ and a beep reminds
	switches on.		you to redial the dispayed phone number

after 15 minutes.

-Satz\Produkte\AX72_Pegasus_DTC\out-

Calling

Dialling with number keys

The phone must be switched on (standby mode). Dial number (always with area code, if necessary with international dial- ling code). To dial international dialling code press and hold 0 until a "+" is dis- played. Press §+List§ and select country.

Accept call

The phone must be switched on (standby mode). An incoming call will interrupt any other use of the phone. Press §Answer§ or A.

Please make sure you have accepted the call before holding the phone to your ear. This will avoid damage to your hearing from loud ring tones!

© Siemens AG 2003, C:\Daten_itl\Siemens\DTP