right page (23) of AX72
Setup 23
VAR Language:
Normal mode
When you switch on your phone again, the previously set profile will be reactivat- ed automatically.
Display
§Menu§ ¢m¢Display
¢Select function.
Start up animation
Shown when phone is switched on.
Shut down animation
Shown when phone is switched off.
Own greeting
Enter greeting to be displayed when phone is switched on.
en; VAR issue date:
© Siemens AG 2003,
Language
Set the language of the display text. When "automatic" is set, the language of
your service provider is used. Reset to this | |
language in standby mode: | |
* | 0 0 0 0 A |
Text input
See also p. 12.
T9 preferred
Activate/deactivate intelligent text entry.
Input language
Select language for text entry. Languages with T9 support are marked with the T9 symbol.
Background
Set background graphic for display.
Logo
Choose picture to be displayed instead of the provider logo.
Colour scheme
Select colour scheme for the entire user interface.
Screensaver
The screensaver shows a picture in the display when a period set by you has elapsed. An incoming call and/or pressing any key will end the function except if the safety function is activated. With code protection, the PIN must be entered.
Big letters
You can choose between two font sizes for the display.
Illumination
Set display illumination to brighter/darker. The darker the setting the longer the standby time.
Contrast
Set colour display contrast.
Call setup
§Menu§ ¢m¢ Call setup ¢ Select function.
Hide ID | b |
When you make a call, your phone number can be displayed on the recipi- ent's display (depending on the service providers).
Call waiting | b |
If you are registered for this service, you can check whether it is set and you can activate/deactivate it (see also p. 11).
Divert | b |
You can specify when calls should be diverted to your mailbox or other numbers.
050613