Siemens AX72 manual Clock, Connectivity

• All calls

left page (24) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)

VAR			Clock
Language:en;	Set up call divert (example):
	24	Setup
VAR	The most common condition for call		§Menu§ ¢m¢ Clock ¢Select function.
	divert is, for example:
issue	•	All Unanswered	Time/date
			The clock must be set to the right time
date:	Includes the conditions Not reachable, No		once at start-up.
	reply, Busy, see below.
			§Change§ ¢ Enter the date first, then
050613	All Unanswered ¢D ¢ Set		the time.
	¢J (enter the phone number, to		Time zones
	which the call should be diverted) ¢§OK§.
	After a short pause, the setting is		Set the time zone for your area.
	confirmed by the network.		Time format

All calls are diverted. nis shown in the top line of the display in standby mode.

Other possibilities for divert:

Not reachable, No reply, Busy

• Status check

You can check the current divert status for all conditions.

After a short pause, the current situation is transmitted by the network and displayed.

p	Condition set.
o	Not set.
s	Display if status is unknown
	(e.g. with a new SIM card).

• Clear all

All set diverts are cleared.

Minute beep

During a call, you will hear a beep after each minute as a reminder of the time elapsed. The recipient does not hear this beep.

Select 24h or 12h.

Date format

DD.MM.YYYY or MM/DD/YYYY

Buddhist year

Switch to the Buddhist year (not on all phone models).

Show clock

Activate/deactivate time display in stand-by mode.

Automatic switch off

The phone switches off each day at the set time.

Activate: J

§Time§ ¢ Enter time (24-hour-clock)

¢§OK§.

Deactivate: §Manual§ ¢§OK§

Connectivity

§Menu§ ¢m¢ Connectivity ¢ Select function.

GPRS b

§Yes§ / §No§

Switch GPRS function on/off.

© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX72_Pegasus_DTC\out-