![](/images/new-backgrounds/1144525/14452541x1.webp)
Putting the handset into service
Putting the handset into service
Removing the protective cover
Remove the protective cover from the display before putting the handset into service.
Inserting the batteries
One battery is provided with the Gigaset 4000 Micro, while two are pro- vided with the Gigaset 4000 Comfort. The batteries are supplied un- charged. They are charged in the handset.
Note:
•Please observe the safety notes on the back cover.
•Only use approved batteries (Æ page 15).
•Open the battery compartment in a
•Your telephone directory entries and all settings remain stored even if you remove the batteries. The date and time settings will be reset.
Opening the battery compartment
Unscrew the battery compartment lid with a coin, for example (1), and re- move it (2).
Inserting the battery
Insert the permitted battery (3).
1
2
6
3
5
4
Closing the battery compartment
Replace the lid (4), slide it back over the battery compartment (5) and screw it on tightly (6).
13