Siemens A35 manual 34Data, Licensing, Technical Data, Care of Phone, Care of Your SIM Card

Page 35

34Data

Licensing

Siemens ICM D MP RD hereby declares that the mobile A35 is in conformity with the essential require- ments and other relevant provisions of Directive 99/5/EC.

A copy of the original declaration of conformity can be found at the follow- ing Internet address:

http://www.siemens.com/a35

Complies with SAR values as per

ICNIRP.

Technical Data

GSM Class 4 (2 watts) Frequency range 880 - 960 MHz

GSM Class 1 (1 watt) Frequency range

1710 - 1880 MHz

Length x Width x Thickness approx. 118 x 46 x 27 mm (without antenna)

Weight: approx. 120 g

Battery voltage: 3.6 V

Charging voltage: 3.3 - 5.5 V

Max. power consumption with standard charging unit: 500 mA

Charging times: 3 h (first time), then 1.5 - 2 h

Standby time: 60 h to 150 h

Talk time: 90 mins to 240 mins

Innovatron Patent

Care of Phone

Clean the phone with a damp cloth or an antistatic wipe. Do not use chemical cleaning agents.

Protect your phone from impact and moisture. Do not expose your phone to direct sunlight.

Care of Your SIM Card

The SIM card must be treated with the same care as a bank card.

Do not bend, scratch or expose to static electricity.

Phone Identification

The following information is important if you lose your phone or SIM card. Please enter:

No. of the SIM card (on the card)

.....................................................

15-digit serial number of the phone (beneath the battery):

.....................................................

Service provider’s customer service number

.....................................................

In the Event of Loss

If your phone and/or SIM card are lost or stolen, call the service provider im- mediately to prevent misuse.

Image 35
Contents A35A35 Contents1 Overview All radio transmitters are subject to restrictions such as Safety3Package Contents A35 telephone User Guide NiMH battery ChargerLan IntroductionIcons Used Icons on the DisplayExample Menu ControlInsert SIM Card Insert and Charge BatteryTo Insert the Battery Getting StartedEnter PIN Switch Telephone OnTo Charge the Battery Emergency CallKey Lock Standby ModeSwitch Telephone Off Hold down Standby modeInternational Number Making CallsDialling with the Keypad Ending CallsProcessing Lists RediallingAnswering Calls Unwanted CallsEntering Other Characters Phonebook11Saving Numbers Writing NamesPhonebook Menu 12PhonebookCalling from Phonebook Sending a Tone Sequence Service numbersPhonebook13 Saving the Tone SequenceNext Speed Dialling Number Ann An Fast access diallingAssigning Speed Dialling Numbers Ann AnRejecting Calls Changing the VolumeDuring a Call Time/UnitsOptions While Reading Text Messages SMSReading New Messages Enter the number or dial from the Phonebook Writing TextMenu „ Messages „ Create Message Options SelectInbox Message ListsOptions While Writing Outbox Setting the Service NoReplying to Messages Displaying CapacityReading Cell Broadcast Messages SetupCell Broadcast Change Mailbox Number Configuring Voice MailDivert to Mailbox Announcements Voice MailHearing Voice Mail Messages via SMSApplications Menu „ Missed Calls Missed CallsEditing the List Menu „ Events „ Missed callsRingers/Melodies Menu „ Ringer/Tones „ All Tones Change Switching All Tones On OffSwitching the Silent Vibrating Alert On/Off 26Ringers/MelodiesCharges Setup27Language TimeDivert 28SetupSecurity Codes SetupPIN Setup SecurityGSM Services 30SetupConc.ID/Incogn Setup31Car Use Processing the Preferred Netw. listProblem Possible Cause Possible Corrective Measures 32TroubleshootingReset all phone settings to their original condition TroubleshootingSiemens Service Problem Possible CauseCare of Phone Technical Data34Data LicensingAccessories35 36Accessories GSM Network Control Codes Coding for teleservice tsCountry Service Unit Number International Service Numbers HotlineIndex Index Serial number Error Reception signal Service tonesInformation Safety Service numbers42Index