Agilent Technologies 5964-8134 manual External Shunt Line and Load Connections

Page 7

External Shunt Line and Load Connections

The Agilent supplied current shunt has both input (line) and output (load) connectors. The customer must supply the cables to connect the ac lines to and from the external current shunt. Agilent supplies one hooded cable cover for the input of the ac source and two hooded cable covers for the shunt. All three of these covers are assembled and installed in the same way. It is the customer’s responsibility to use these covers when making line cable connections. Note that a different cable cover is provided for the ac output of the ac source.

The following figure shows the Load and Line connectors on the external current shunt. Note the location of the line, neutral and ground connectors and connect your cables accordingly. Note that the connections on the output of the ac source are not in the same order on the barrier block as on the shunt barrier block.

WARNING: SAFETY HAZARD You must replace the cable hoods after completing all connections. This is because the screw terminals will be at line potential during operation.

N L

1

2

6 7

3

8

1.NEUTRAL CONNECTION (BLUE OR WHITE)

2.LINE CONNECTION (BROWN OR BLACK)

3.GROUND CONNECTION (GRN/YEL OR GRN)

4.POWER CORD

5.CONNECTOR NUT

6.RUBBER BOOT

7.POWER SAFETY COVER

8.STRAIN RELIEF CONNECTOR

4

5

Line Connections

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Addendum Contents Agilent Option 022 Description Agilent Dual Power Analyzer DescriptionFront Panel Menus Additions Scpi Programming Commands AdditionsRear Panel Connections InstallationPower Analyzer input. Connector plug is removable Turn the unit off before connecting any wiresMeasurement Cable Connections External Shunt Line and Load Connections To set the output frequency modulation Check the External Current Shunt SettingSetting the Output Frequency Modulation Front Panel ProgrammingUse the Input menu for selecting the frequency source Using the Front Panel Display with the Power Analyzer InputMaking Power Analyzer Input Measurements To select the measurement sourceMEASureTVOLt? FETChTVOLt? Additional Measurement CommandsParameters Examples MEASureTVOLtABSolute? FETChTVOLtABSolute?MEASureVOLTageRANKed? FETChVOLTageRANKed? Query Syntax Parameters ExamplesSENSeNSELect Additional Sense CommandsSENSeFREQuencySOURce RST Value Unit Additional Frequency Modulation CommandsFMDEViation FMFREQuencyCALibrateCURRentEXTernal Additional Calibration CommandsCommand Syntax Parameters Examples CALibrateVOLTageEXTernalBehavior Differences of Existing Scpi Commands UPS Transfer Time Measurement Programming ExampleMaking a Measurement Using the Power Analyzer Input with the GUIPrograms Agilent AC Source AC Source GUI Making a Voltage Phase Difference Measurement Modulating the Output Frequency Performing a Transfer Time TestTable A-1. Performance Specifications Power Analyzer Input SpecificationsTable A-2. Supplemental Characteristics Equipment Required Verification and Calibration for Option 020/022Table B-1. Equipment Required Test Set up Verification ProcedurePower Analyzer Current Measurement Accuracy Power Analyzer Voltage Measurement AccuracySummary of Front Panel Calibration Menu Calibration ProcedureEnable Calibration Mode Display Command FunctionCAL Save

5964-8134 specifications

Agilent Technologies 5964-8134 is an advanced analytical instrument designed for versatile applications in laboratory settings. It serves as a crucial component for professionals working in fields such as forensic science, environmental testing, and pharmaceutical analysis.

One of the primary features of the 5964-8134 is its exceptional chromatographic performance. The device employs sophisticated separation techniques, utilizing a high-efficiency column that enhances the resolution of complex mixtures. This capability allows scientists to identify and quantify trace levels of compounds in samples with high precision.

Equipped with a state-of-the-art detector, the 5964-8134 offers a broad dynamic range to accommodate various analyte concentrations. This feature ensures that both minor and major components can be accurately measured, making it ideal for applications involving diverse sample matrices. The integrated software provides users with easy access to data analysis tools, enabling seamless interpretation of results.

The 5964-8134 is built on cutting-edge technology, including advanced mass spectrometry which enhances its sensitivity and specificity. This technology enables the detection of low-abundance compounds in complex samples, providing insights that would be difficult to obtain using traditional methods. Additionally, the instrument supports multiple ionization techniques, allowing users to tailor the analysis to specific requirements of their project.

Another characteristic of the Agilent 5964-8134 is its user-friendly interface. The equipment is designed with the operator in mind, featuring intuitive controls and a touchscreen display that promotes ease of use. This design minimizes the learning curve for new users, enabling efficient operation and streamlined workflow in busy laboratory environments.

Moreover, the 5964-8134 ensures robust performance with its advanced temperature control and reliable fluidic systems. These features contribute to improved reproducibility and stability during analyses, which are critical in achieving consistent results across experiments.

With its combination of high performance, cutting-edge technologies, and user-centric design, Agilent Technologies 5964-8134 stands out as a leading choice for professionals seeking reliable and accurate analytical solutions. As laboratories continue to demand innovative instruments that push the boundaries of research capabilities, the 5964-8134 proves to be an essential tool in scientific discovery and analysis.
Top Page Image Contents