Audio-Technica AT-LP120-USB manual Direct-Drive Professional USB and Analog Turntable System

Page 2

Direct-Drive Professional USB and Analog Turntable System

Safety instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments/accessories specified by the manufacturer.

12.Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Where a mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

16.Please keep the unit in a good ventilation environment.

17.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on apparatus.

Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Caution: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance.

Caution: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Introduction

Thank you for purchasing the AT-LP120-USB Direct-Drive Professional USB and Analog Turntable System. Audio-Technica brings its legendary quality and audio fidelity to the digital realm with this LP-to-digital recording system. In the box, you’ll find everything you need to transfer your classic LP collection to digital files: Audio-Technica’s AT-LP120- USB stereo turntable, complete with USB output that allows direct connection to your computer; Audacity recording software for MAC

or PC; an integral dual-magnet Audio-Technica phono cartridge; a USB cable and adapter cables. The turntable also offers a built-in switchable phono/line preamp that allows connection to a stereo system equipped with either a phono or line-level input.

The AT-LP120-USB Direct-Drive Professional USB and Analog Turntable System features the following:

•USB output—no special drivers required for direct connection to your computer

•Direct drive high-torque motor

•Selectable 33/45/78 RPM speeds

•Selectable internal stereo phono pre-amplifier

•S-shaped tone arm assembly with:

•Adjustable counterweight

•Anti-skate adjustment

•Tone arm height adjustment and lock

•Tone arm lift with hydraulic action and lift lever

•Tone arm rest with locking mechanism

•Selectable high-accuracy quartz-controlled pitch lock

•Selectable +/–10% or +/– 20% pitch adjustment ranges

•Stroboscopic platter speed indicator

•Forward and reverse play

•Cast aluminum record platter with slip mat

•Start/stop button

•Pop-up stylus target light

•45-RPM adapter with storage receptacle

•Receptacle for extra headshell

•Adjustable feet for leveling

•Removable hinged dust cover

To assure maximum satisfaction from this product, please read the information and follow the instructions presented in this manual. Please keep the manual in an accessible location for future reference. We suggest that you save all the packaging materials for possible future storage, moving, or shipping.

Caution: To avoid stylus damage, make certain the included stylus guard is in place whenever the turntable is being installed, moved, or cleaned.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Installation and Operation Pages Introduction Safety instructionsDirect-Drive Professional USB and Analog Turntable System Main Features Tone Arm Assembly Diagram Rear View DiagramInitial Setup Setting Tone Arm Assembly Height Setting Tone Arm Balance and Tracking ForceSetting Anti-skate Assembling the Dust CoverPreparing to Play Checking and Adjusting PitchOperation Playing the RecordReplacing the Cartridge Mechanical AssemblyReplacing the Stylus Replacing the StylusTroubleshooting Tips For Better PerformanceSpecifications† Turntable SpecificationsFrançais Instructions de sécurité Risque DE Choc Électrique NE PAS OuvrirPrincipale caractéristique Ensemble bras de lecture Vue arrièreInstallation Réglage de la compensation de la force centripète Installation suiteAssemblage du couvercle pare-poussière Réglage de hauteur de l’ensemble bras de lectureLecture du disque UtilisationPréparation de la lecture Vérification et ajustement de la hauteur tonaleAssemblage mécanique Remplacement de la pointeRemplacement de la cellule Branchements électriquesLes morceaux semblent être trop rapides ou trop lents DépannageConseils d’optimisation des performances Caractéristiques techniques AT-LP120-USBEspañol Instrucciones de seguridad IntroducciónCaracterísticas principales Diagrama de la unidad del brazo de lectura Diagrama de vista traseraDesembalaje Configuración del conmutador del selector de voltajeInstalación inicial Montaje del tocadiscosMontaje de la cubierta antipolvo Configuración de la compensación antipatinaje Anti-SkatingInstalación inicial continuación ConexionesReproducción de discos FuncionamientoPreparación para reproducir música Comprobación y ajuste de la altura tonal pitchMontaje mecánico Sustitución de la agujaSustitución del cartucho Conexiones eléctricasEl tocadiscos funciona pero la aguja salta por el disco Solución de problemasConsejos para un mejor rendimiento Los discos suenan demasiado rápidos o demasiado lentosEspecificaciones EspecificacionesPage Garantía limitada de un año One-Year Limited WarrantyGarantie limitée de 1 an

AT-LP120-USB specifications

The Audio-Technica AT-LP120-USB is a direct-drive turntable that has garnered acclaim for its impressive features and performance, making it a popular choice among vinyl enthusiasts, DJs, and audiophiles alike. Designed to provide a seamless listening experience, this turntable is equipped with a host of advancements that enhance both sound quality and usability.

One of the standout features of the AT-LP120-USB is its direct-drive motor. Unlike belt-driven turntables, which can suffer from fluctuations in speed, the direct-drive mechanism offers precise and consistent rotation, ensuring that your records play at the correct speed. This is particularly beneficial for DJs who require a reliable turntable that can handle scratching and beat-matching with ease.

The AT-LP120-USB is equipped with a variable pitch control slider, allowing users to adjust the playback speed by ±10% or ±20%. This feature offers significant flexibility for DJs looking to match the tempo of different tracks, as well as for listeners who prefer to experiment with their record playback.

This turntable also highlights its USB output, which allows for easy digital conversion of vinyl records to digital files. Accompanied by Audacity software, users can conveniently digitize their vinyl collection, preserving their favorite albums in a modern format without losing the rich sound quality inherent in vinyl.

The AT-LP120-USB features a solid aluminum platter that not only adds to the turntable's aesthetic appeal but also contributes to reduced resonance for improved playback quality. The built-in adjustable anti-skate control helps ensure that the stylus tracks smoothly in the grooves of records, further enhancing sound fidelity.

Moreover, the AT-LP120-USB includes a removable headshell, which allows for easy replacement of cartridges. The included AT-95E cartridge produces clear, dynamic sound and can be easily upgraded for users looking for even higher-quality audio performance.

With its sturdy construction and iconic design, the Audio-Technica AT-LP120-USB is equipped with a pre-amplifier, making it compatible with various speaker systems, including those that lack dedicated phono inputs. Overall, the AT-LP120-USB represents a blend of vintage charm and modern technology, appealing to a wide range of users longing for an authentic vinyl experience. Its quality, versatility, and ease of use set it apart as a leading option in the turntable market.
Top Page Image Contents