Fagor America 20i-T B, 30i-T B operation manual General technical characteristics, Connections

Page 17

WARNING

Do not handle the connectors while the unit is under power.

Before handling the connectors (mains, feedback, etc.) make sure that the unit is not under power.

It is NOT enough to turn the display off by using the [on/off] key at the keyboard

3.3General technical characteristics

•Universal Power Supply between 100V AC and 240V AC ±10% at Mains frequency between 45 Hz and 400 Hz. Between 120Vdc and 300 Vdc

•It withstands power outages of up to 20 milliseconds.

•10-year memory backup of installation parameters when the unit is off.

•The operating temperature inside the DRO enclosure must be between 5º C and 45º C (41ºF and 113ºF).

•The storage temperature inside the DRO enclosure must be -25º C and +70º C (-13º F and 158º F).

•Maximum relative humidity: 95% non condensing at 45ºC (113ºF).

•Front Panel Sealing: IP54 (DIN 40050), Rear panel: IP4X (DIN40050)

except for built-in models in which case is: IP20.

3.4Connections

3.4.1Connection of the feedback systems

The feedback systems (linear or rotary encoders) are connected via SUB-D HD type 15-pin female connectors: X1 through X3. The latter (for the 2nd axis) is not available at the 10i model.

Characteristics of feedback inputs: X1, X2 and X3:

- Power consumption: 250 mA at the +5V input.

- Admits square-wave signal (TTL). (A, B, Io) 1

- Maximum frequency: 250 KHz, minimum gap between flanks: 950 nsec.

- Phase shift: 90º ±20º, hysteresis: 0.25 V, Vmax: 7V, maximum input current: 3mA

- High threshold (logic state 1) 2.4V < VIH < 5V

- Low threshold (logic state 0) 0.0V < VIL < 0.55V

V0612-20i-T / 30i-T - Installation/Operation - DRO installation - (17/32)

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 20i-T / 30i-T Parameters to configure axis position reading and display DRO installationDRO description DRO operationDescription of LEDs and keys Front panelTurning the unit on and off PrecautionsDisplay modes Page At this point, one can proceed in two ways Incremental modeExample To preset part zero Absolute modeHome search sequence Machine Reference selection and searchTo preset a tool, just follow this procedure Tool PresetOperation with tools Deleting all tool offsetsSpecial operations Tool preset in Hold modeScaling factor Coordinate freeze HoldTool change at any known point of the part To do this, follow this procedureTaper cone calculation Operating with the calculator CalculatorDisplay Keys Operation Recall and Reset modes= Preset Installation of the built-in model DRO installationUL seal Rear panelOn the back of the unit the following items may be found Characteristics of feedback inputs X1, X2 General technical characteristicsConnections Connection of the feedback systemsAccessing the Easy Setup mode Easy setupOperating mode Feedback connection. Connectors X1, X2 Pin Signal FunctionAxis status will then switch to one of the following Installation parametersPower and machine connection To get into parameter editing To quit the parameter editing modeTo enter a parameter Move through parametersParameter Parameters to configure axis position reading and displayPAR00 DigitPAR03 Factory settingPAR02 PAR05 PAR04PAR08 PAR09PAR12, PAR13 Binary type home search settingPAR14 PAR11 PersonalizePoint Nr Position Error to be Compensated Multi-point leadscrew error compensationError PAR15PAR65 PAR20PAR53 CE seal UL sealDeclaration of conformity Electromagnetic CompatibilitySafety conditions Electrical shock symbol Symbols that may be carried on the productGround Protection symbol It is recommended to mount the DRO verticallyMaterial returning terms Warranty termsEeeeeeee Error codesFagor Automation S. Coop Maintenance

30i-T, 20i-T B, 20i-T, 30i-T B specifications

Fagor America has long been recognized as a leader in providing advanced CNC (Computer Numerical Control) solutions for various industrial applications. Among its standout products are the Fagor 30i-T, 20i-T, and 20i-T B control systems, which have garnered widespread acclaim for their innovative features and versatile technologies.

The Fagor 30i-T is designed for high-performance machining applications, making it ideal for complex part production. It offers a powerful processing unit that supports high-speed machining and incorporates advanced features such as adaptive control algorithms. This technology optimizes cutting conditions in real time, leading to improved efficiency and extended tool life. The 30i-T is compatible with various machining centers and lathes, allowing for seamless integration into existing production lines.

The Fagor 20i-T brings a balance of performance and affordability, tailored for mid-range applications. This control system incorporates a user-friendly interface that simplifies operation, benefiting operators of all skill levels. It is equipped with features such as graphics-based programming, which provides operators with a visual representation of machining processes. Additionally, the 20i-T supports multiple axes and can handle simultaneous multi-axis machining, enabling the creation of intricate designs without compromising on precision.

For even more specialized applications, the Fagor 20i-T B offers enhanced capabilities for bending machines and panel saws. This model includes dedicated functions for managing bending sequences and ensuring accurate positioning, making it a favorite among fabricators. The user-friendly interface, combined with intuitive programming options, allows operators to set up and execute tasks quickly, contributing to increased production efficiency.

All models, including the 30i-T and 20i series, are designed with built-in safety features and comply with international standards, ensuring safe operation in various industrial environments. They also support various communication protocols, facilitating connectivity with different devices and systems, thus enabling easy data exchange and interoperability.

In conclusion, Fagor America's 30i-T, 20i-T, and 20i-T B control systems represent cutting-edge solutions that cater to a wide range of machining and manufacturing applications. With their emphasis on user-friendly technology, real-time optimization, and robust performance, these CNC controls are poised to enhance productivity and streamline operations for businesses in the competitive manufacturing landscape.
Top Page Image Contents