Fagor America 30i-T B, 20i-T B PAR12, PAR13, PAR14, PAR11 Personalize, Travel limit

Page 24

Therefore, when using standard Io's, this parameter must be assigned the value of the distance from the machine zero point to the feedback reference point.

Numeric value in resolution units for each axis. Factory setting: 0.

This value will be in mm or inches depending on whether the INCH LED is off or on.

PAR11 Personalize.

Digit

8Display the feedrate of the moving axis (only for the 30i-T)

7Operate always in mm.

6Operate always in inches.

5Do not display "Fagor DRO" on power-up.

4If =0, normal zero setting and coordinate presetting (factory set) If =1, quick zeroing of the position value displayed on each axis.

3If =1, allow the selection of the work plane for bolt-hole drilling

2Not being used; it must be set to "0".

1 The key affects one axis ( = 0) or both ( = 1).

 

If it affects each axis independently, after pressing this key, one must press

 

the axis key.

 

It may toggle from absolute reading mode to incremental. This parameter

 

determines whether this toggle affects one axis or both. Factory setting: "1".

PAR12, PAR13

Travel limit.

 

To set the negative axis travel limit.

 

Both parameters admit any value.

 

This value will be in mm or inches depending on whether the INCH LED is off

 

or on.

 

If PAR08 bit 2 = 1, when the axis exceeds the travel distance between both

 

parameters, the relevant display starts blinking until it is positioned within

 

these limits.

PAR14

Binary type home search setting.

Digit

 

8, 7

Not being used at this time (they must be set to "0")

6If =1, it indicates mandatory home search on power-up.

5Direction of the distance-coded Io ( 0 = Increasing , 1 = Decreasing).

41 = Pitch of the distance-coded Io 100 mm, 0 = 20 mm

31 = Pitch of the distance-coded Io: 40 mm. 0 = 20 mm

2Type of Io of the linear encoder. (0 = fixed, 1 = distance-coded).

1If =1, Linear encoder without I0. To carry out a home search when the feedback device does not have a reference mark “Io”, this parameter must be set to “1”.

Factory setting: "0".

(24/32) - DRO installation - Installation/Operation - 20i-T / 30i-T - V0612

Page 23 Page 25
Image 24
Page 23 Page 25
Contents 20i-T / 30i-T DRO installation Parameters to configure axis position reading and displayDRO description DRO operationFront panel Description of LEDs and keysPrecautions Turning the unit on and offDisplay modes Page Incremental mode ExampleAt this point, one can proceed in two ways Absolute mode To preset part zeroMachine Reference selection and search Home search sequenceTool Preset To preset a tool, just follow this procedureOperation with tools Deleting all tool offsetsTool preset in Hold mode Special operationsScaling factor Coordinate freeze HoldTo do this, follow this procedure Taper cone calculationTool change at any known point of the part Calculator Operating with the calculatorRecall and Reset modes = PresetDisplay Keys Operation DRO installation Installation of the built-in modelRear panel On the back of the unit the following items may be foundUL seal General technical characteristics Characteristics of feedback inputs X1, X2Connections Connection of the feedback systemsEasy setup Accessing the Easy Setup modeOperating mode Feedback connection. Connectors X1, X2 Pin Signal FunctionInstallation parameters Power and machine connectionAxis status will then switch to one of the following To quit the parameter editing mode To get into parameter editingTo enter a parameter Move through parametersParameters to configure axis position reading and display ParameterPAR00 DigitFactory setting PAR02PAR03 PAR04 PAR05PAR08 PAR09Binary type home search setting PAR12, PAR13PAR14 PAR11 PersonalizeMulti-point leadscrew error compensation Point Nr Position Error to be CompensatedError PAR15PAR20 PAR53PAR65 UL seal CE sealDeclaration of conformity Electromagnetic CompatibilitySafety conditions Symbols that may be carried on the product Electrical shock symbolGround Protection symbol It is recommended to mount the DRO verticallyWarranty terms Material returning termsError codes EeeeeeeeMaintenance Fagor Automation S. Coop

30i-T, 20i-T B, 20i-T, 30i-T B specifications

Fagor America has long been recognized as a leader in providing advanced CNC (Computer Numerical Control) solutions for various industrial applications. Among its standout products are the Fagor 30i-T, 20i-T, and 20i-T B control systems, which have garnered widespread acclaim for their innovative features and versatile technologies.

The Fagor 30i-T is designed for high-performance machining applications, making it ideal for complex part production. It offers a powerful processing unit that supports high-speed machining and incorporates advanced features such as adaptive control algorithms. This technology optimizes cutting conditions in real time, leading to improved efficiency and extended tool life. The 30i-T is compatible with various machining centers and lathes, allowing for seamless integration into existing production lines.

The Fagor 20i-T brings a balance of performance and affordability, tailored for mid-range applications. This control system incorporates a user-friendly interface that simplifies operation, benefiting operators of all skill levels. It is equipped with features such as graphics-based programming, which provides operators with a visual representation of machining processes. Additionally, the 20i-T supports multiple axes and can handle simultaneous multi-axis machining, enabling the creation of intricate designs without compromising on precision.

For even more specialized applications, the Fagor 20i-T B offers enhanced capabilities for bending machines and panel saws. This model includes dedicated functions for managing bending sequences and ensuring accurate positioning, making it a favorite among fabricators. The user-friendly interface, combined with intuitive programming options, allows operators to set up and execute tasks quickly, contributing to increased production efficiency.

All models, including the 30i-T and 20i series, are designed with built-in safety features and comply with international standards, ensuring safe operation in various industrial environments. They also support various communication protocols, facilitating connectivity with different devices and systems, thus enabling easy data exchange and interoperability.

In conclusion, Fagor America's 30i-T, 20i-T, and 20i-T B control systems represent cutting-edge solutions that cater to a wide range of machining and manufacturing applications. With their emphasis on user-friendly technology, real-time optimization, and robust performance, these CNC controls are poised to enhance productivity and streamline operations for businesses in the competitive manufacturing landscape.
Top Page Image Contents