Fagor America 20i-T B Parameters to configure axis position reading and display, PAR00, Digit

Page 21

3.7 Parameters to configure axis position reading and display.

The digits of digital parameters refer to the digits on the axis displays so digit "1" (that can be changed with the [1] key) corresponds to the rightmost digit and "8" to the leftmost digit.

X

X

X

X

X

X

X

X

<-- binary code

8

7

6

5

4

3

2

1

<-- keys

PARAMETER

FUNCTION

PAR00

Feedback configuration, different per axis, binary type.

 

This parameter sets the specific characteristics of the feedback device (rotary

 

or linear encoder) used to read the axis position.

Digit

 

8, 7, 6

Not being used at this time (they must be set to "0")

5Feedback resolution units: Linear axis: 0 = mm, 1 = inches

Note: These units refer to feedback pulses not to the position display.

4Type of axis: They must be set to zero.

3Not being used at this time

2Not being used; it must be set to "0".

1Counting direction (0 = normal, 1 = reverse)

If an axis count increases or decreases in the opposite direction to the one desired, change the value of this digit.

PAR01

Feedback resolution. Independent for each axis.

 

Possible values:

 

 

Linear axis:From 0.0001 mm up to 1.0000 mm (0.000005" to 0.03937")

 

Rotary axis:From 0.0001º to 1.0000º (from 1 to 999 seconds).

 

Factory setting: 0.0050 mm (5 µm).

 

 

Formula to calculate encoder resolution:

 

 

360

360

 

R = p-----⋅-------TTLfactor---------------------------⋅----Sfactor------------------=

p-------⋅---PAR--------------02-------⋅---PAR--------------03---

Where:

R = Resolution in degrees

p = Pulses per turn of the encoder TTLfactor = Multiplying factor for TTL signal Sfactor = Multiplying factor for sinusoidal signal

V0612-20i-T / 30i-T - Installation/Operation - DRO installation - (21/32)

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 20i-T / 30i-T Parameters to configure axis position reading and display DRO installationDRO description DRO operationDescription of LEDs and keys Front panelTurning the unit on and off PrecautionsDisplay modes Page Incremental mode ExampleAt this point, one can proceed in two ways To preset part zero Absolute modeHome search sequence Machine Reference selection and searchTo preset a tool, just follow this procedure Tool PresetOperation with tools Deleting all tool offsetsSpecial operations Tool preset in Hold modeScaling factor Coordinate freeze HoldTo do this, follow this procedure Taper cone calculationTool change at any known point of the part Operating with the calculator CalculatorRecall and Reset modes = PresetDisplay Keys Operation Installation of the built-in model DRO installationRear panel On the back of the unit the following items may be foundUL seal Characteristics of feedback inputs X1, X2 General technical characteristicsConnections Connection of the feedback systemsAccessing the Easy Setup mode Easy setupOperating mode Feedback connection. Connectors X1, X2 Pin Signal FunctionInstallation parameters Power and machine connectionAxis status will then switch to one of the following To get into parameter editing To quit the parameter editing modeTo enter a parameter Move through parametersParameter Parameters to configure axis position reading and displayPAR00 DigitFactory setting PAR02PAR03 PAR05 PAR04PAR08 PAR09PAR12, PAR13 Binary type home search settingPAR14 PAR11 PersonalizePoint Nr Position Error to be Compensated Multi-point leadscrew error compensationError PAR15PAR20 PAR53PAR65 CE seal UL sealDeclaration of conformity Electromagnetic CompatibilitySafety conditions Electrical shock symbol Symbols that may be carried on the productGround Protection symbol It is recommended to mount the DRO verticallyMaterial returning terms Warranty termsEeeeeeee Error codesFagor Automation S. Coop Maintenance

30i-T, 20i-T B, 20i-T, 30i-T B specifications

Fagor America has long been recognized as a leader in providing advanced CNC (Computer Numerical Control) solutions for various industrial applications. Among its standout products are the Fagor 30i-T, 20i-T, and 20i-T B control systems, which have garnered widespread acclaim for their innovative features and versatile technologies.

The Fagor 30i-T is designed for high-performance machining applications, making it ideal for complex part production. It offers a powerful processing unit that supports high-speed machining and incorporates advanced features such as adaptive control algorithms. This technology optimizes cutting conditions in real time, leading to improved efficiency and extended tool life. The 30i-T is compatible with various machining centers and lathes, allowing for seamless integration into existing production lines.

The Fagor 20i-T brings a balance of performance and affordability, tailored for mid-range applications. This control system incorporates a user-friendly interface that simplifies operation, benefiting operators of all skill levels. It is equipped with features such as graphics-based programming, which provides operators with a visual representation of machining processes. Additionally, the 20i-T supports multiple axes and can handle simultaneous multi-axis machining, enabling the creation of intricate designs without compromising on precision.

For even more specialized applications, the Fagor 20i-T B offers enhanced capabilities for bending machines and panel saws. This model includes dedicated functions for managing bending sequences and ensuring accurate positioning, making it a favorite among fabricators. The user-friendly interface, combined with intuitive programming options, allows operators to set up and execute tasks quickly, contributing to increased production efficiency.

All models, including the 30i-T and 20i series, are designed with built-in safety features and comply with international standards, ensuring safe operation in various industrial environments. They also support various communication protocols, facilitating connectivity with different devices and systems, thus enabling easy data exchange and interoperability.

In conclusion, Fagor America's 30i-T, 20i-T, and 20i-T B control systems represent cutting-edge solutions that cater to a wide range of machining and manufacturing applications. With their emphasis on user-friendly technology, real-time optimization, and robust performance, these CNC controls are poised to enhance productivity and streamline operations for businesses in the competitive manufacturing landscape.
Top Page Image Contents