Fagor America 30i-T B, 20i-T B Installation parameters, Power and machine connection

Page 19

The axis status will then switch to one of the following:

Ready Correct feedback setup

Repeat Wrong feedback setup, the process should be repeated.

Error Error in the feedback system.

Note: If the feedback device is a steel tape type linear encoder, press [F] before pressing [ENTER] so it is properly detected.

3.5.3Power and machine connection

Always mount it vertically so its keyboard is within operator's reach and its digits are easily visible (at operator's eye level).

Do not connect or disconnect the DRO connectors while it is under power.

Connect all metallic parts to a common point on the machine tool and it to the

general ground point. Use cables of enough gage (no thinner than 8 mm 2 ) for this connection.

3.6 Installation parameters

These DROs have a number of installation parameters to configure it for a particular application.

The way these parameters are displayed depends on whether they are general or particular for each axis.

•If it affects the axes, the parameter number (PAR??) appears on each axis display and the corresponding axis key must be pressed to modify it.

•If it is a general parameter, the X display will show the parameter number and the Z its current value; if there is only one axis, its number will appear on the X display and, after pressing , its value.

There are several kinds of parameters depending on how to set them:

to

• With binary values, it only takes values of 0 or 1 for each digit. The value is

changed by pressing the key with the relevant digit between [1] and [8].

 

 

Where [1] corresponds to the rightmost digit of the display and [8] to the

 

leftmost digit.

•Numeric values, usually with the corresponding axis resolution, they are entered as regular coordinate preset.

• Options; the value is changed by pressing this key which will make the various options appear in a cyclic way.

V0612-20i-T / 30i-T - Installation/Operation - DRO installation - (19/32)

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 20i-T / 30i-T DRO operation DRO installationParameters to configure axis position reading and display DRO descriptionDescription of LEDs and keys Front panelTurning the unit on and off PrecautionsDisplay modes Page Example Incremental modeAt this point, one can proceed in two ways To preset part zero Absolute modeHome search sequence Machine Reference selection and searchDeleting all tool offsets Tool PresetTo preset a tool, just follow this procedure Operation with toolsCoordinate freeze Hold Tool preset in Hold modeSpecial operations Scaling factorTaper cone calculation To do this, follow this procedureTool change at any known point of the part Operating with the calculator Calculator= Preset Recall and Reset modesDisplay Keys Operation Installation of the built-in model DRO installationOn the back of the unit the following items may be found Rear panelUL seal Connection of the feedback systems General technical characteristicsCharacteristics of feedback inputs X1, X2 ConnectionsFeedback connection. Connectors X1, X2 Pin Signal Function Easy setupAccessing the Easy Setup mode Operating modePower and machine connection Installation parametersAxis status will then switch to one of the following Move through parameters To quit the parameter editing modeTo get into parameter editing To enter a parameterDigit Parameters to configure axis position reading and displayParameter PAR00PAR02 Factory settingPAR03 PAR09 PAR04PAR05 PAR08PAR11 Personalize Binary type home search settingPAR12, PAR13 PAR14PAR15 Multi-point leadscrew error compensationPoint Nr Position Error to be Compensated ErrorPAR53 PAR20PAR65 Electromagnetic Compatibility UL sealCE seal Declaration of conformitySafety conditions It is recommended to mount the DRO vertically Symbols that may be carried on the productElectrical shock symbol Ground Protection symbolMaterial returning terms Warranty termsEeeeeeee Error codesFagor Automation S. Coop Maintenance

30i-T, 20i-T B, 20i-T, 30i-T B specifications

Fagor America has long been recognized as a leader in providing advanced CNC (Computer Numerical Control) solutions for various industrial applications. Among its standout products are the Fagor 30i-T, 20i-T, and 20i-T B control systems, which have garnered widespread acclaim for their innovative features and versatile technologies.

The Fagor 30i-T is designed for high-performance machining applications, making it ideal for complex part production. It offers a powerful processing unit that supports high-speed machining and incorporates advanced features such as adaptive control algorithms. This technology optimizes cutting conditions in real time, leading to improved efficiency and extended tool life. The 30i-T is compatible with various machining centers and lathes, allowing for seamless integration into existing production lines.

The Fagor 20i-T brings a balance of performance and affordability, tailored for mid-range applications. This control system incorporates a user-friendly interface that simplifies operation, benefiting operators of all skill levels. It is equipped with features such as graphics-based programming, which provides operators with a visual representation of machining processes. Additionally, the 20i-T supports multiple axes and can handle simultaneous multi-axis machining, enabling the creation of intricate designs without compromising on precision.

For even more specialized applications, the Fagor 20i-T B offers enhanced capabilities for bending machines and panel saws. This model includes dedicated functions for managing bending sequences and ensuring accurate positioning, making it a favorite among fabricators. The user-friendly interface, combined with intuitive programming options, allows operators to set up and execute tasks quickly, contributing to increased production efficiency.

All models, including the 30i-T and 20i series, are designed with built-in safety features and comply with international standards, ensuring safe operation in various industrial environments. They also support various communication protocols, facilitating connectivity with different devices and systems, thus enabling easy data exchange and interoperability.

In conclusion, Fagor America's 30i-T, 20i-T, and 20i-T B control systems represent cutting-edge solutions that cater to a wide range of machining and manufacturing applications. With their emphasis on user-friendly technology, real-time optimization, and robust performance, these CNC controls are poised to enhance productivity and streamline operations for businesses in the competitive manufacturing landscape.
Top Page Image Contents