Operation
Monitor function
This feature allows you to listen for weak signals on the current channel.
1.Pressing and holding 
allows you to monitor your channel for activity.
Note: It is good radio etiquette to monitor the channel for activity before you transmit, to ensure that you do not interrupt other users already on the channel.
Baby monitor function
One of the units can be set as Baby monitor. The radio will transmit a signal when it is activated by the crying baby or another sound in the room.
The PMR will no longer be able to receive signals to avoid that your baby is disturbed during his/her sleep.
The other PMR must be set to the same channel and CTCSS code to receive the signal from the Baby Monitor.
To set your radio as baby monitor
1.Press 
button until appears.
2.Press 
or 
button to set baby monitor sensitivity level to 1/2/3 to turn baby monitor function ON.
3.Press 
to confirm the setting.
Note:
1.In standby mode, when speaking into the microphone, the radio will automatically transmit like IVOX does.
2.The radio can’t receive or if you press any key it will not generate key tones so that you will not disturb the baby.
To disable baby monitor function
1.Press 
button until appears.
2.Press 
or 
until OF appears.
3.Press 
to confirm the setting.
20