Oricom PMR3000 operating instructions Hands-free use Ivox, Setting VOX and Ivox sensitivity levels

Page 19

Operation

Hands-free use (IVOX)

This feature allows you to transmit “hands-free” by talking into the radio microphone without using the headset.

How to use the IVOX feature

1.Press button until VOX appears.

2.Press or button to “” to disable the IVOX or enable IVOX by select level 1, 2 or 3.

3.Press button to confirm your setting.

4.At standby mode, when IVOX function activated, to transmit, speak into the radio microphone. To receive, stop talking.

5.Press will disable IVOX operation.

Note: There is a short delay after you start talking, before the radio transmits.

Setting VOX and IVOX sensitivity levels

Adjusting your radio’s VOX and IVOX microphone sensitivity level helps to minimize the possibility of unintended noises triggering a transmission, and enhances the ability to pick up quiet voices. If a headset is fitted to your radio these instructions will help you to adjust the VOX sensitivity.

1.Press until VOX and a flashing number appears in the centre of the display. With the headset connected you will see

in the top right corner of the display. Without the headset you will see I.

2.Select sensitivity level 1, 2 or 3 by using or . Choose - 1- If you speak loudly, or are in a noisy environment.

2- Suitable for most applications.

3- If you speak softly, or are in a quiet environment.

Note: When you connect a VOX headset, the radio will automatically be set to the last chosen VOX sensitivity level. If IVOX is active, the radio will automatically select IVOX level.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Operating Instructions Page Table of contents Occupants of the vehicle Damaged AntennaBatteries For Vehicles with an Air BagCleaning and Care Radio Operation and EME Exposure Transmit and Receive ProcedureRead This Information Before Using Your Oricom Radio Exposure to Radio Frequency EnergyNot carry the radio in the breast pocket Electromagnetic Interference/CompatibilityAircraft Medical Devices PacemakersOther Medical Devices Medical Devices Hearing AidsN13134 Z765 Your Oricom PMR3000 radio controls Your Oricom PMR3000 radio display This pack contains Installing the batteriesBatteries will be fully charged within 14 hours Attaching the belt clipsAttaching the belt clips 2 included Removing the belt clipRoger beep Talk Confirmation Tone Adjusting the volume levelTurning your radio on and off Selecting the channelYou can specify a different code for each channel Interference eliminator codes CtcssScan advance Channel scanNuisance delete Selecting a call tone Channel busy indicatorKeypad lock Call toneDual channel scan Time-out timerBattery level meter Duplex modeTo set dual channel and code To disable the dual channel scanHow to use VOX Hands-free use VOXHands-free use Ivox Setting VOX and Ivox sensitivity levelsHow to use the Ivox feature Press will disable Ivox operationTo set your radio as baby monitor To disable baby monitor functionMonitor function Baby monitor functionAutomatic energy saving mode Setting squelch levelKeypad tone Stopwatch Channel Frequency Table UHF channels and frequenciesFrequency MHz Usage 476.850 476.750 Simplex 476.775476.800 476.825Warranty information Australia Warranty information Australia Page Customer Support Troubleshooting Guide in this user guide
Top Page Image Contents