Mitel LDP7004N/D manual Menu Tree, Call Forward

Menu Tree

This menu tree can be used for programming various advanced features. To enter the menu press the [TRANS/PGM] button.

[1] RING	[5] MESSAGE
1.1 TYPE	5.1 SET PRESELECTED MSG
1.2 ANSWER MODE	5.2 SET CUSTOM MSG
1.2.1 OHD (H)
1.2.2 TONE (T)	[6] ANNOUNCEMENT
1.2.3 PRIVACY (P)	6.1 REC USER GREETING
1.8 ICM RING	6.2 LISTEN TIME/DATE
1.9 CO RING	6.3 LISTEN STA NUMBER
	6.4 LISTEN STA STATUS
[2] COS	6.5 REC PAGE MSG
2.1 COS DOWN	6.6 ERASE USER GREETING
2.2 COS RESTORE	6.7 ERASE PAGE MESSAGE
2.3 WALKING COS
	[7] SUPPLEMENTARY
[3] AUTH / MOBILE EXTN	7.1 LCD DISPLAY LANGUAGE
3.1 AUTH REGISTER	7.3 BGM
3.2 AUTH CHANGE	7.4 REGISTER STA NAME
3.3 REG MOBILE-EXT	7.5 SPK/HEADSET
3.4 ACTIVE MOBILE-EXT	7.6 HEADSET RING MODE
	7.7 WTU STA NUM RCVR
[4] TIME / CONF-ROOM
4.1 SET WAKE-UP TIME	[*] SYSTEM (DO NOT USE)

4.2WAKE-UP DISABLE

4.3ACTIVE CONF-ROOM

4.4DEACTIVE-CONF ROOM

For detailed information on how to use the above menu tree there is a full user guide available from www.cranetlg.co.uk/ipldk/userguides

General Functions

Call Forward

1. Dial 554 from your handset.

3.Select a forward option as per below. (Example: Select option 4, Busy/No Answer)

4.Select the destination appropriate to the call forward type. (To select the integral messaging card for options 1 to 4 press # - You will need permission to use this application).

5.To cancel the call forward dial 554, #.

Call Forward

It is possible to forward you phone in a number of ways. The options available are:

0 – Follow-Me (To forward calls from your extension to an extension at a temporary location. The forward is activated at the temporary location. A valid authorisation code will be required).

1 – Unconditional (This option allows you to forward all calls immediately to a Station, Hunt Group or the integral Voice Messaging card).

2 – Busy (Destination options are as per option 2. Calls will only forward when you are busy – on the phone).

3 – No Answer (Destination options as per option 1. Calls will only forward when a ‘No-Answer’ timer expires. The length of the time is determined by a qualified System Administrator).

4 – Busy/No Answer (Combines options 2 & 3. Most popular, especially where Voicemail is used).

5 – Off-Net (This allows you to forward your phone unconditionally to a remote location such as Mobile or home phone using a speed dial).

6– No Answer Off-Net (As per option 6 but only after a no-answer timer)

7 – Access Not Permitted

# - Allows you to cancel any call forward.

7004N/D User Guide Menu Tree 11 7004N/D User Guide General Functions 04