Kyocera K322 manual Making a call, Answering a call, Making and Answering Calls

2MAKING AND ANSWERING CALLS

Making a call

Make sure you are in an area where a signal can be received. Look for the symbol on the home screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to where the signal strength is better.

When the phone has been idle for a time, it changes to power save mode. Press any key to return to normal operating mode.

1.Open the flip.

2.Enter the phone number and press .

3.Press or close the flip to end the call.

Voice or Digit dialing

You can make a voice call by speaking the name of the person/place you want to call

- or -

you can speak the digits of a phone number.

Note: Voice call requires that a contact be saved with a voice tag. See “Creating a voice tag for a contact” on page 44.

1.Press .

2.Follow the voice prompts to initiate voice or digit dialing. The phone places the call.

3.Press to end the call.

Answering a call

When a call comes in, the phone rings, vibrates, or lights up. The phone number of the caller appears on the screen if it is not restricted. If the number is stored in your Contacts directory, the contact name appears.

1.Open the flip.

2.Press to answer the incoming call.

- or -

Press to answer the incoming call and turn on the speakerphone.

Answering calls using the flip

You can set the phone to answer immediately when you open the flip. This feature does not apply to incoming data or fax calls.

•Select Menu → Settings → Convenience → Open to Answer → Enabled.

–Select Disabled to have the phone continue ringing when you open the flip.

Adjusting the volume during a call

•To adjust the earpiece or speakerphone

volume during a call, press up or down.

User Guide for the Kyocera K322 Phone 9