Kyocera K322 manual Connecting to a TTY/TDD device, Setting position location, Been implemented

Note: To purchase a cable, call 800-349-4188 (U.S.A. only), 858-882-1410, or visit www.kyocera-wireless.com/store.

1.Connect the phone to the laptop or PC.

2.Set the Com speed.

3.Select Menu → Settings → Network → Data/Fax Calls.

4.Press to select an option:

–Voice only allows only voice calls.

–Fax, next call or Data, next call sets the phone to fax mode or data mode for the next incoming call or the next 10 minutes.

–Fax, until off or Data, until off forces the phone into fax mode or data mode until the phone is turned off.

Connecting to a TTY/TDD device

You can connect the phone to a TTY device for the hearing impaired.

Note: Enable TTY only when using the phone with a TTY device.

1.Connect the TTY device to the phone.

2.Enter from your keypad.

3.Press to select the TTY option.

4.Close the Information window by pressing to select OK.

5.Highlight TTY On and press .

Setting position location

This setting allows you to share your location information with network services other than emergency services (For example: 911, 111, 999, and 000) in markets where service has

been implemented.

Note: This feature works only when your phone is in digital mode. You do not have the option of turning off the locator to emergency services.

1.Select Menu → Settings → Network → Location.

2.Select 911 Only or Location On.

–911 Only (default) shares your position information only with emergency services when you call your 3-digit emergency code (911, 000, 111, etc.).

–Location On shares your position information with your service provider’s network, in addition to

emergency services.

User Guide for the Kyocera K322 Phone 43