Kyocera K322 manual Answering the phone, Answering automatically, Answering using voice commands

To activate the Voice Wake-up setting:

•Select Menu → Settings →

Voice Features → Voice Wake-Up → With accessory.

To wake up the phone:

1.Say “Wake Up” and listen for a tone.

2.Say “Wake Up” again until you hear two tones.

If the phone does not recognize your “Wake up” command, see “Training voice recognition” on page 47.

Answering the phone

You can set your hands-free car kit to

(1)answer automatically or (2) answer using a voice command.

Answering automatically

You can set your phone to answer automatically.

Note: This setting also works with the portable hands-free car kit.

•Select Menu → Settings → Accessories → Auto-Answer → After 5 secs.

Answering using voice commands

If Auto-Answeris turned off, you can use a voice command to answer an incoming call using the installed hands-free car kit.

•Select Menu → Settings → Accessories → Auto-Answer → Disabled.

To activate the Voice Answer setting:

Note: The accessory must be attached to use this feature.

1.Select Menu → Settings → Voice Features → Voice Answer.

2.Highlight Enabled and press .

3.Select Menu → Settings → Silent Mode →

Normal Sounds, then press .

To answer a call:

When you receive an incoming call, the phone responds: “Incoming call, answer?” or “Incoming roam call, answer?” If the caller is recognized as a contact entry in your phone, then the phone will say “Incoming call from (Name), answer?”

• Say “Yes” or press any key except .

Ignoring an incoming call

To ignore an incoming call, do one of the following:

•Say “No” and press to silence the alert.

•Remain silent. The voice alert repeats twice and the phone rings once, then returns to the home screen.

46 Using Voice Recognition