13 Voice Commands
Voice commands allow you to call a contact, dial a phone number, access menus, or find contact information from your voice dial list.
Note: You cannot use voice recognition to end a call; you must press the End key when the flip is open.
Voice dial list
To call or find a contact using voice dial you must add the contact to your voice dial list. The contact name must not have more than three words or components in a contact name for voice dialing recognition.
Add contacts
To add a contact to your voice dial list:
1.Select Menu > Contacts > Voice Dial List.
2.At the contact list, highlight a contact and press the OK key. A check mark appears next to a name when voice dialing is active. Check each name you wish use with voice dialing.
3.Select Save.
Remove contacts
To remove a contact from your voice dial list:
1.Select Menu > Contacts > Voice Dial List.
2.At the contact list, highlight a check marked contact and press the OK key. No check mark appears next to a name when voice dialing is inactive. Uncheck each name you wish removed from voice dialing.
3.Select Save.
Voice commands
Start voice commands
1.From the home screen, press the Send key to initiate voice commands. The phone prompts, “Say a command”.
2.Say one of the following commands and following the voice prompts.
–“Contact <name>” call to a contact on your voice dial list.
–“Dial Number <number>” call by speaking the digits of the phone number.
–“<shortcut name>” sends you to a menu item.
–“Find Contact” allows you to find a contact from your voice dial list.
User Guide | 55 |