Kyocera S2410 manual Digit lengths, Voice answer, Voice wake-up, Voice training

Digit lengths

You can set the number of digits used for a phone number in your voice dial list.

Select Menu > Settings > Voice Features > Digit Lengths and one of the following:

•North American allows 7, 10, and 1 + 10 digits in a phone number.

•Permit All allows 4-14 digits in a phone number.

Voice answer

You can set your phone to answer a call automatically when using a headset.

Enable voice answer

Select Menu > Settings > Voice Features > Voice Answer > With Accessory. To use the voice answer feature, you must disable the Auto-Answer feature (see “Auto-answer” on page 51) and set the phone to normal sounds (see “Ringer mode” on page 48).

Use voice answer

When you receive an incoming call, the phone prompts you with a voice recording. If the caller is recognized as a contact entry in your phone, then the phone prompts “Incoming call from (Name), answer?” Say “Yes” or press any key except the End key to answer. Say “No” and press the End key to silence the alert. Remain silent. The voice alert repeats twice and the phone rings once, then returns to the home screen.

Voice wake-up

You can set your phone to make a call using a headset.

Enable voice wake-up

Select Menu > Settings > Voice Features > Voice Wake-Up > With Accessory.

Use voice wake-up

To wake up the phone:

1.Say “Wake Up” and listen for a tone.

2.Say “Wake Up” again until you hear two tones.

If the phone does not recognize your Wake Up command, see “Voice training” on page 50.

Voice training

If your phone is having trouble recognizing your voice, you can train by speaking number commands.

1.Select Menu > Settings > Voice Features > Voice Training.

2.Read the message and select OK.

3.Select Train Numbers.

4.Read the message and select OK.

5.Follow the prompts displayed on the screen. Speak each number until training is complete.

To untrain your phone select Menu > Settings > Voice Features > Voice Training > OK > Untrain Numbers.

50 Voice features