Kyocera S2410 manual Getting Started, Phone battery, Install the battery, Charge the battery

1 Getting Started

Phone battery

Install the battery

To install the battery:

1.Hold the phone face down.

2. Find notch directly below the back cover. It is square. Using your thumbnail, lift the cover to remove.

3.Place the battery in the

battery casing with the metal contacts facing toward the top of the

phone. The metal contacts of the battery must make contact with

the metal contacts of the battery casing.

4. Replace the battery door by lining up the

notches with the

openings at the top and on each side of the battery casing.

5.Snap the cover into place.

Charge the battery

You must have at least a partial charge in the battery to make or receive calls.

To charge the battery:

1.Connect the AC adapter

to the microUSB jack on the side of the phone.

2.Plug the adapter into a wall outlet.

The battery icon in the

upper-right corner of the screen tells you whether the phone is:

•Charging (the icon is animated)

•Partially charged

•Fully charged

You can safely recharge the battery at any time, even if it has a partial charge.

Warning: The battery will not charge if you use the phone while it is connected to an AC adapter.

Note: Before removing the battery, make sure the phone is powered off.

User Guide 1