–MR displays currently stored value on the screen.
–MC clears value currently stored in memory.
Timer
The Timer counts down for the specified time. It beeps when that amount of time has elapsed.
1.Select Menu > Tools > Timer > Set.
2.Enter the time length.
–Scroll left or right to move between hours, minutes and seconds fields.
–Scroll up or down to change hours, minutes and seconds.
3.If needed, select Sound and one of the sounds to change the sound.
4.To work the timer, select the following options:
–Start begins the countdown.
–Stop pauses the countdown.
–Reset clears the timer.
When the countdown is complete select Off to silence the alarm.
Stopwatch
The Stopwatch counts time for you.
1.Select Menu > Tools > Stopwatch.
2.To work the stopwatch, select the following options:
– Start begins counting.
–Stop pauses counting.
–Reset clears the stopwatch. Press the Back key to return to the menu.
World clock
The world clock lets you check times in cities around the world in relation to local time.
Set world clock
1.Select Menu > Tools > World Clock.
The world clock menu is displayed. Your local time and date is on the first line, followed by your selected world city and that city’s time and date.
2.When you first access World Clock, scroll left or right to select a time zone.
The world clock menu is displayed again, with the new time zone.
Search world clock
From the world clock menu, you can search by city or country.
1.Select Menu > Tools > World Clock > Options > Search City or Search Country.
2.In the search field, enter letter(s) to search by. Results are listed as you type.
3.Select a city or country from the list.
38 | Timer |