![Unit Display and Operation Selector](/images/new-backgrounds/34223/34223159x1.webp)
Unit Display and Operation Selector
INDOOR UNIT
IMPORTANT
Avoid using radio equipment such as mobile phones near
(within 1 m of) the indoor unit. Some radio equipment may cause the unit to malfunction.
If the trouble occurs, disconnect power and restart the air conditioner after a few minutes.
Operation selector
ON
OFF
TEST
Remote control receiver
OPERATION OPERATION lamp
TIMER TIMER lamp
| REMOTE CONTROL | This section picks up infrared signals from the remote control unit | ||
|
| receiver | (transmitter). | |
|
|
|
|
|
| Operation selector |
| ||
|
| ON position | This position is for operating the air conditioner with the wireless | |
|
|
|
| remote control unit. |
|
|
|
| Set the selector normally in this position. |
|
|
|
|
|
| OFF position | Switch the selector to the OFF position if you are not going to use | ||
|
|
|
| the air conditioner for a few days or longer. |
|
|
|
| The OFF position does not disconnect the power. Use the main |
|
|
|
| power switch to turn off power completely. |
|
|
|
|
|
| TEST position | This position is used only when servicing the air conditioner. | ||
|
|
|
| · To operate in the TEST position, first select DRY, COOL, or HEAT |
|
|
|
| mode with the selector in the ON position, and then switch the |
|
|
|
| selector to the TEST position. However, the air conditioner will |
|
|
|
| not operate when set to the TEST position if it has been stopped |
|
|
|
| by setting to the OFF position. |
|
|
|
| · During TEST mode, the OPERATION lamp and timer lamp flash, |
|
|
|
| and remote control operation does not work. |
|
|
|
| Do not set at the TEST position for normal operation. |
|
| CAUTION |
| |
|
|
|
| |
|
|
|
|
|
| OPERATION lamp | This lamp lights when the system is in the continuous DRY, | ||
|
|
|
| COOL, FAN and HEAT mode. |
|
|
|
|
|
|
| TIMER lamp | This lamp lights when the system is being controlled by the timer. | |
|
|
|
|
|
8 |