Operation with the Remote
Control Unit
1. Automatic Operation
SET TEMP.
NORMAL
1HR. | ON |
|
TIMER | OFF | TEMP. |
STEP 2
FLAP FAN SPEED MODE
ON OFF
NIGHT
SET CANCEL SETBACK
STEP 1
NOTE
NOTE
Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is in the ON position.
Once the 
mode is selected and the unit is preset by following the steps below, you can have the air conditioner automatically bring the room to the desired temperature simply by pressing the ON/OFF operation button.
STEP 1 Press the MODE selector to select 
.
STEP 2 | Press the ON/OFF operation button. |
To stop the air conditioner, press the ON/OFF operation button again.
·To change the temperature setting, press the temperature setting buttons and change the setting to the desired temperature.
·The temperature setting changes by two degrees each time one of the
TEMP. buttons is pressed. The temperature setting may be changed within a range of ±8 °F of the standard temperature. (The air conditioner remembers the new temperature setting even when it is turned off.)
14 |
