Sanyo KGS1411, CG1411 service manual Remote Control Unit continued

		Remote Control Unit (continued)
MODE selector button		Use this button to select the AUTO, DRY, COOL or FAN mode.
Green or red (AUTO)		: When this setting is selected, the air conditioner calculates the
		difference between the thermostat setting and the room
		temperature and automatically switches to the ``COOL'' or
		``HEAT'' mode as appropriate.
Red (HEAT)		: The air conditioner makes the room warmer.
Orange (DRY)		: The air conditioner reduces the humidity in the room.
Green (COOL)		: The air conditioner makes the room cooler.
Green (FAN)		: The air conditioner works only as a circulation fan.
FLAP button		Press this button either to select to set the airflow direction to one of
		the six possible positions manually, or to select the sweep function,
		which moves the flap up and down automatically.
		: The airflow direction is set automatically.
		: The airflow direction can be set manually. (six positions)
		: The flap moves up and down automatically.
		To switch to the sweep function ( ) when in the manual ( ) mode,
	NOTE
		hold down the FLAP button.
FAN SPEED selector		: The air conditioner automatically decides the fan speed.
	button	: High fan speed
		: Medium fan speed
		: Low fan speed
1 HR. TIMER button		1HR. : When you press this button, regardless of whether the unit is
(1-hour off timer)		operating or stopped, the unit operates for one hour and then
		shuts down.
ACL button (All clear)		Puts the remote control unit into pre-operation status. Always press
		this button after replacing the batteries.
SET button		After using the TIMER ON button or TIMER OFF button to set the timer,
		press this button to activate the new setting.
CANCEL button		Press this button to cancel the current timer setting.

OI-202-11EG 11