Sanyo KGS1411 Care and Cleaning continued, Anti-moldfilter How to remove the anti-moldfilter

Anti-mold filter

How to remove the anti-mold filter

Care and Cleaning (continued)

The anti-mold filter behind the air intake grille should be checked and cleaned at least once every two weeks.

Air intake grille

1.Grasp both ends of the air intake grille and pull

it out and up.

2. Push the anti-mold filter up slightly, and then pull

it down.

Anti-mold filter

Cleaning Use a vacuum cleaner to remove light dust. If there is sticky dust on the filter, wash the filter in lukewarm, soapy water, rinse it in clean water and dry it.

How to replace the anti-mold filter

1.With the ``FRONT'' mark facing you, slide the anti-mold filter up into the unit and then lower the handle into the groove on the unit.

2.After installing the anti-mold filter, press the locations

marked by the arrows ( ) and close the air intake grille.

Air intake grille

Anti-mold filter

Insert into the groove on the unit.

OI-202-25EG 25