Kyocera E1100 manual Lightpipe LED Behavior

The phone is shown here in the closed position. When the phone is closed, the keys are locked to prevent accidental key presses.

1.Camera lens.

2. Volume key raises or lowers ringer volume.

3. Camera key activates Camera mode. To activate camera mode, press and hold the Camera key.

4.External screen displays time, caller ID, signal, and battery strength.

5. Lightpipe LED.

6.Jack for micro USB cable (sold separately).

7. Jack for a hands-free headset (sold separately). Warning: Inserting an accessory into the incorrect jack will damage the phone.

Lightpipe LED Behavior

Your phone’s light pipe LED displays different patterns depending upon the alert. You can disable the light pipe LED, see “Set Light Pipe Behavior” on page 54.

New message	One flash. If you do not respond, your phone will flash again to remind you.
Incoming call	Heartbeat pulse. It will continue until you answer the phone or miss the call.
Missed call	One flash. If you do not respond, your phone will flash again to remind you.
In call	Wave pulse. It will continue until the call ends.
Alarm	Three flashes. It will continue until you respond to the alert.
Scheduler	Three flashes. It will continue until you respond to the alert.
Bluetooth	One flash. It will continue until you respond to Bluetooth request.
Low battery	One flash. It will continue until you charge the phone.
Charging	Wave pulse. Displays when the phone is being charged.

Note: Incoming emergency calls always activate the LED, even if you have disabled it.

User Guide 13