Kyocera E1100 manual Volume, Set Flip Sounds, Set Power On/Off Sounds, Keypad

•Vibe then Ring vibrates for the first 10 seconds and then rings for the remainder of the incoming call alert.

•Lights Only lights up for the duration of the incoming call or other alerts.

You can also press and hold the # Space key to go back forth from Vibrate Only mode to Normal Sounds mode.

Note: The phone will ring when it is attached to an external power source (such as a charger), even if all sounds have been silenced.

Volume

Control the volume of your phone’s features.

Set Volume

Control the volume of the phone’s ringer, speakerphone, earpiece and keypad.

1.Select Menu > Settings > Sounds > Volume > Ringer Volume, Spkrphone Volume, Earpiece Volume, or Key Volume.

2.Scroll right to increase the volume or left to decrease the volume.

3.Press the OK key to save.

Enable Smart Volume

Automatically adjust the volume during a call, based on surrounding noise levels.

Select Menu > Settings > Sounds > Volume > Smart Volume > Enabled.

Set Flip Sounds

Assign specific sounds for when your phone flip opens or closes.

1.Select Menu > Settings > Sounds > Flip Sounds > Flip Open or Flip Close.

2.Select a sound. As you scroll down the list you will hear the sounds.

Set Power On/Off Sounds

You can set your phone to play a sound when powering on and off.

1.Select Menu > Settings > Sounds >

Pwr On/Off Sound > Power On Sound or Power Off Sound.

2.Select a sound. As you scroll down the list you will hear the sounds.

Keypad

Control the keypad tones of the phone.

Set Key Press Sounds

Choose the sounds the keys make when pressed.

Select Menu > Settings > Sounds > Keypad > Key Sounds > Tone, Click, or Off.

Set Key Tone Length

Control the length of the keypad tones.

Select Menu > Settings > Sounds > Keypad > Key Length > Normal or Long.

52 Sounds