Kyocera E1100 manual End Phone Calls, Activate Voice Dialing, Volume Control, Use Speed Dialing

Answer Using Speakerphone

Press the Speakerphone key.

Answer Using Flip

You can set the phone to answer immediately when you open the flip. This feature does not apply to incoming data calls. For more information, see “Enable Open to Answer” on page 57.

End Phone Calls

To end a phone call press the End key.

Activate Voice Dialing

1.Press and hold the Send key.

2.Follow the prompts.

For more information, see “Voice Commands” on page 78.

Volume Control

There are several ways to control the volume of your phone.

Adjust Volume during a Call

To adjust the earpiece volume during a call, press the Volume key up or down.

Use the Speakerphone

Your phone has a built-in speakerphone.

•To turn on the speakerphone, press the Speakerphone key. The speakerphone icon appears on the home screen when the speakerphone is on.

•To turn off the speakerphone, press the Speakerphone key again.

Note: If you press the Speakerphone key during an incoming call, you will answer the call.

Silence an Incoming Call

•To silence the phone without answering the call select Silence, press the Back key, or press the Volume key.

•To silence the phone and answer the call, select Silence and then press the Send key.

Note: In the absence of voicemail, this feature drops the call.

Use Speed Dialing

Speed dialing allows you to assign a one- or two-digit shortcut to a contact. Before you can use speed dialing you must save a phone number as a contact and assign a speed dial location to it. See “Customize a Number” on page 27.

To call a contact that has a speed dial location.

1.Enter the one- or two-digit speed dial location.

2.Press the Send key.

18 End Phone Calls