Kyocera E1100 manual Set Expert Mode, Set Display Results, Set Digit Lengths, Voice Answer

Set Expert Mode

When expert mode is used, instead of speaking a command following the initial voice prompts, you can speak the command after you hear a tone.

Select Menu > Settings > Voice Features > Expert Mode and one of the following:

•Normal sets phone to default voice prompts.

•Expert sets phone to sound tones instead of voice prompts.

Set Display Results

You can set the phone to display up to three recognition contacts when calling or searching for a contact with voice commands.

Select Menu > Settings > Voice Features > Display Results > Single Best or Three Best.

Set Digit Lengths

You can set the number of digits used for a phone number in your voice dial list.

Select Menu > Settings > Voice Features > Digit Lengths and one of the following:

•North American allows 7, 10, and 1 + 10 digits in a phone number.

•Permit All allows 4-14 digits in a phone number.

Voice Answer

Enable Voice Answer

You can set your phone to answer a call with your voice when using a headset.

1.Disable the Auto-Answer feature,

see “Enable Auto-Answer” on page 59.

2.Set the phone to normal sounds, see “Set Ringer Mode” on page 51.

3.Set the phone to play sound from

the headset, see “Set Headset Sounds” on page 59.

4.Select Menu > Settings > Voice Features > Voice Answer > With Accessory.

Use Voice Answer

When you receive an incoming call, the phone prompts you with a voice recording. If the caller is recognized as a contact entry in your phone, then the phone prompts “Incoming call from (Name), answer?” Do one of the following:

•Say “Yes” or press any except the End key to answer the call.

•Say “No” or press the End key to ignore the call.

•Remain silent. The voice alert repeats twice and the phone rings once, then returns to the home screen.

58 Voice Features