Network management (4/5)
settings
You have the choice to telephone in satellite mode (SAT) or in GSM 900 mode (GSM) – or to switch automatically between the two modes if you happen to be in an area where only one of the two is possible.
There are several ways to
Note:
For display symbols indicating the network sta- tus and status of signal strength, see page 5.
Network Phone/Call
Operating mode: GSM and/or SAT (5)
You can set the mobile phone’s operating mode to GSM or to SAT access. Or you may use both of them by switching between them.
Single mode
Irrespective of whether you select exclusive GSM Only or SAT Only mode, you will lose net- work connection if you leave the coverage area that can be reached in that single mode.
To set the operation mode:
Select Menu > System Pref.
The current setting is displayed
Press Change
Select GSM Preferred or
SAT Preferred or
GSM Only or
SAT Only
Preferred mode
If you decide to set the ’preferred’ access either to GSM mode or to SAT mode, the mobile phone will normally operate in that preferred mode. Only if signal strength for operation in the preferred mode becomes too weak the mobile phone switches to operate in the alternative mode:
–If GSM Preferred is selected: The mobile phone will initially attempt to access a GSM network, if no GSM network is available it will automatically attempt to access a SAT network. When operating on a SAT network, the mobile phone pe- riodically scans for available GSM net- works and will switch to GSM if the service is available
–If SAT Preferred is selected: The mobile phone will initially attempt to access a SAT network, if no SAT network is avail- able it will automatically attempt to access a GSM network. When operating on a GSM network the mobile phone will only switch to SAT service if the GSM signal is lost. If SAT operation is desired, the mobile phone can be manually switched to SAT mode using the ’SAT Only’ single mode setting.
Sound & Alert
Statistics/Info
GPS facilities
41 | WAP Internet |
|
|