Getting started
Sound & Alert (7-1)
You may choose from a variety of different acoustic signals for ringing and alerting tones.
Note:
Control of the loudspeaker volume and of the ringing volume is described on page 10.
During a call Phone number lists
Ringing volume (7-1-1-8)
If you want to set the ringing volume only, you have to use the menu. You can select from 6 volume levels.
Select Menu > Settings > Sound & Alert > Ringing > Volume
The current level is displayed in a bar chart:
Select Back
Scroll to the desired volume level
While adjusting the volume, the ringing tone is played at the particular level and the level is shown in the display
Press Select
Diversion
Security settings SMS/Broadcast
Ringing melody (7-1-1)
You can select from a list of ringing melodies to set different ringing melodies for
–incoming voice calls
–incoming faxes and data
–High Power Alerting
–alarms
–caller groups
When selecting a ringing melody as de- scribed below, first the currently active melo- dy and then the melody of the current list po- sition is played.
Melody for incoming voice calls (7-1-1-1)
You can set the general ringing melody for all voice calls, except for caller groups you have assigned to a special melody:
Select Menu > Settings > Sound & Alert > Ringing > Voice
The current setting is displayed Select the melody from the list Press Select
44