Melody for incoming faxes and data (7-1-1-2)
You can set a ringing melody for incoming fax and data calls:
Select Menu > Settings > Sound & Alert > Ringing > Data / Fax
The current setting is displayed Select the melody from the list Press Select
Melody for High Power Alerting (7-1-1-3)
You can select a specific melody which will sound when the signal strength is too weak to connect you with an incoming call but is still strong enough to send an alert that someone is trying to reach you, so you can move to a better place for reception.
Select Menu > Settings > Sound & Alert > Ringing > SAT Alerting
The current setting is displayed Select the melody
Press Select
Melody for alarms (7-1-1-4)
Select Menu > Settings > Sound & Alert > Ringing > Alarm
The current setting is displayed Select the melody
Press Select
Melodies for caller groups (7-1-1-5)
It is possible to assign different ringing melo- dies for different caller groups corresponding to the caller groups in the phonebook.
Note:
The setting of melodies for caller groups only applies to voice calls! So, when you receive a fax or a data call from a number, which is re- corded in a caller group, you will not hear the ringing melody assigned to the concerned caller group. Instead of it the melody for in- coming faxes and data (see page 45) will be played.
To assign ringing melodies to caller groups:
Select Menu > Settings > Sound & Alert >
Ringing > Caller Groups > VIP or
Business or Private or Family or Others
The current setting is displayed Scroll to the desired ringing melody Press Select
Earset alerting (7-1-1-6)
When earset alerting is set to On, you will hear the ringing only in a connected earset. If earset alerting is set to Off, you will hear the ringing from the buzzer and in the earset.
Select Menu > Settings > Sound & Alert > Ringing > Earset Alert
The current setting is displayed
Press Change
Press Save
Phone/Call settings
Network
Sound & Alert
Statistics/Info
GPS facilities
45 | WAP Internet |
|
|