Ecom Instruments Ex-CDMA 02 manual Application, Safety information, Faults and damage

Page 4

1. Application

The EX-CDMA 02 is a mobile phone based on the CDMA standard for indus- trial application in areas with an increased risk of explosion in Class I Div 2.

2. Safety information

These safety instructions contain information and safety regulations which are to be observed without fail for safe operation in the described conditions. Non-observance of this information and these instructions can have serious consequences or may violate regulations.

Please read these operating instructions carefully before starting to use the unit!

3. Faults and damage

If there is any reason to suspect that the safety of the unit has been impaired, it must be withdrawn from use and removed immediately from the hazardous area.

Measures must be undertaken to prevent it from being restarted accidentally. We recommend that the unit is returned to the manufacturer for inspection.

The safety of the unit may be compromised, if, for example:

-there is visible damage to the housing.

-the unit has been subjected to excessive loads.

-the unit has been improperly stored.

-the unit has been damaged in transit.

-unit markings or inscriptions are illegible.

-malfunctions occur.

-permitted limit values have been exceeded.

4. Safety regulations

Use of this unit assumes that the operator observes conventional safety regulations and has read the certificate in order to eliminate faulty operation of the unit.

The following safety regulations must also be complied with:

-Before using the unit in hazardous areas, the charging interface must be inspected for contamination and if required, cleaned with a brush or by blowing off with compressed air.

-The battery compartment cover may not be opened inside the hazardous area.

-The battery compartment cover is not allowed to use on non explosion proved mobiles

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Non-Incendive Cell Phone Ex-CDMA Table of Contents Page Safety information Faults and damageSafety regulations ApplicationSpecifications Storage temperature 22 to +140F -30 to +60CCleaning, maintenance and storage Ex-DataCertificate of Compliance Page Page Page Warranty and Liability User Guide for the ecom Ex-CDMA 02 Phone Kyocera is a registered trademark of KyoceraPage Page Page Radio frequency RF energy August 1996, the U.S. Federal Communications Commission FCC2V DC 0.6A Getting Started Important Turn the phone off Press and hold Screen goes blankPage SID Page Making and Answering Calls Page Page Page Page Page Page Setting Call Guard to avoid roaming calls Entering LETTERS, NUMBERS, and Symbols Entering words quickly Choose Lowercase the next letter Information, see Enter a number UseChoose Storing Contacts Down to highlight the phone number you want to edit To call the contact, highlight the number and press Pager Fax MobileSending and Receiving Text Messages To select Insert Page Understanding appended messages If you cannot send messagesImportant You will be charged for each message segment To activate Direct View Select Done Page Page Customizing Your Phone Disappears. The phone will now ring for incoming calls Page Adjusting the backlighting Page Page Page Page Data settings Setting Com port speed Using Voice Recognition Phone responds „Say a name Read the message and press Using Tools Press to add an event to a selected dateClear the value currently stored in memory Media Gallery Saving memory GET IT NOW About Get It Now Opening an application Connecting to the Internet Using Mobile Web Press to select Yes to enable securityDisabling an application Information can be obtained by pressing to open System InfoGetting Help Customer Support Page Copyright 2008 ecom instruments GmbH
Top Page Image Contents