Ecom Instruments Ex-CDMA 02 manual Data settings Setting Com port speed

Page 52

Data settings

Setting Com port speed

The Com Speed sets the data rate at which your phone connects to a laptop or PC, or at which it sends and receives over-the-air text messages.

1.Select Menu Settings Accessories Com Speed.

2.Select the speed. The options are: 19.2 kbps,115.2 kbps (default), 230.4 kbps.

Note: There may be a higher charge for making calls using high-speed data in areas where 1X service is available.

Setting the phone to receive data or faxes

Your phone may be able to receive certain data or faxes, depending on the system sending the information. To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode to data/fax mode.

1.Connect the phone to the laptop or PC.

2.Set the Com Speed.

3.Select Menu Settings Network Data/Fax Calls.

4.Press to select an option:

-Voice only - Allow only voice calls.

-Fax, next callor Data, next call - Set the phone to fax mode or data mode for the next incoming call or the next 10 minutes.

-Fax, until offor Data, until off - Force the phone into fax mode or data mode until the phone is turned off.

Note: You cannot receive voice calls while the phone is in data/fax mode. Connecting to a TTY/TDD device

You can connect the phone to a TTY device for the hearing impaired.

Note: Enable TTY only when using the phone with a TTY device.

1.Connect the TTY device to the phone.

2.Enter from your keypad.

3.Press to select the TTY option.

Setting position location

This setting allows you to share your location information with network ser- vices other than emergency services (911, 111, 000, etc.), in markets where service has been implemented.

Note: This feature works only when your phone is in digital mode. You do not have the option of turning off the locator to emergency services.

51

Image 52
Contents Non-Incendive Cell Phone Ex-CDMA Table of Contents Page Safety information Faults and damageSafety regulations ApplicationSpecifications Storage temperature 22 to +140F -30 to +60CCleaning, maintenance and storage Ex-DataCertificate of Compliance Page Page Page Warranty and Liability User Guide for the ecom Ex-CDMA 02 Phone Kyocera is a registered trademark of KyoceraPage Page Page Radio frequency RF energy August 1996, the U.S. Federal Communications Commission FCC2V DC 0.6A Getting Started Important Turn the phone off Press and hold Screen goes blankPage SID Page Making and Answering Calls Page Page Page Page Page Page Setting Call Guard to avoid roaming calls Entering LETTERS, NUMBERS, and Symbols Entering words quickly Choose Lowercase the next letter Information, see Enter a number UseChoose Storing Contacts Down to highlight the phone number you want to edit To call the contact, highlight the number and press Pager Fax MobileSending and Receiving Text Messages To select Insert Page Understanding appended messages If you cannot send messagesImportant You will be charged for each message segment To activate Direct View Select Done Page Page Customizing Your Phone Disappears. The phone will now ring for incoming calls Page Adjusting the backlighting Page Page Page Page Data settings Setting Com port speed Using Voice Recognition Phone responds „Say a name Read the message and press Using Tools Press to add an event to a selected dateClear the value currently stored in memory Media Gallery Saving memory GET IT NOW About Get It Now Opening an application Connecting to the Internet Using Mobile Web Press to select Yes to enable securityDisabling an application Information can be obtained by pressing to open System InfoGetting Help Customer Support Page Copyright 2008 ecom instruments GmbH