Ecom Instruments Ex-CDMA 02 manual Ex-Data, Specifications, 22 to +140F -30 to +60C

Page 5

-The battery may only be changed or charged outside the hazardous area.

-It is not allowed to carry additional battery packs in the hazardous area.

-Only AM CDMA 00036 batteries specified by the manufacturer may be used.

-The use of other batteries is strictly prohibited and will result in the nullifica- tion of explosion protection.

-The battery may only be charged outside the hazardous area using the ap- propriate travel charger Kyocera Travel Charger Model: TXTVL10072. Other chargers that are suitable for the unit may also be used.

At the moment are no suitable accessories for the hazardous area available It must be ensured that the unit is only taken into areas according Class1 Div2.

5. Ex-Data

FM-Indicator: NI/I/2/ABCD T6

Ta = -22° to +140°F ( -30° to +60°C )

Intrinsically Safe for use in a Class I, Division 2, Groups A, B, C & D with a Temperature class of T6

6. Specifications

 

Operating voltage:

3.7 V

Dimensions (LxWxD):

150 x 50 x 35 mm

Weight:

approx. 200g

Battery / power supply:

AM CDMA 00036

Operating time:

(standby/RX/TX) 5 hours (90/5/5)

Ambient temperature Ta:

-22° to +140°F ( -30° to +60°C )

Storage temperature:

-22° to +140°F ( -30° to +60°C )

7. Cleaning, maintenance and storage

-Only use a damp and suitable cloth or sponge to clean the unit. Do not use any solvents or abrasive cleaning agents when cleaning.

-It is recommended that you have the functionality and accuracy of the unit inspected by the manufacturer every two years.

-The battery should be removed from the unit during prolonged periods of storage.

-Do not allow storage temperatures to exceed or fall below the permitted range of -22° to +140°F ( -30° to +60°C ).

Image 5
Contents Non-Incendive Cell Phone Ex-CDMA Table of Contents Page Faults and damage Safety informationSafety regulations ApplicationStorage temperature 22 to +140F -30 to +60C SpecificationsCleaning, maintenance and storage Ex-DataCertificate of Compliance Page Page Page Warranty and Liability Kyocera is a registered trademark of Kyocera User Guide for the ecom Ex-CDMA 02 PhonePage Page Page August 1996, the U.S. Federal Communications Commission FCC Radio frequency RF energy2V DC 0.6A Getting Started Important Screen goes blank Turn the phone off Press and holdPage SID Page Making and Answering Calls Page Page Page Page Page Page Setting Call Guard to avoid roaming calls Entering LETTERS, NUMBERS, and Symbols Entering words quickly Choose Information, see Enter a number UseChoose Lowercase the next letter Storing Contacts Down to highlight the phone number you want to edit To call the contact, highlight the number and press Sending and Receiving Text Messages MobilePager Fax To select Insert Page Important You will be charged for each message segment If you cannot send messagesUnderstanding appended messages To activate Direct View Select Done Page Page Customizing Your Phone Disappears. The phone will now ring for incoming calls Page Adjusting the backlighting Page Page Page Page Data settings Setting Com port speed Using Voice Recognition Phone responds „Say a name Read the message and press Press to add an event to a selected date Using ToolsClear the value currently stored in memory Media Gallery Saving memory GET IT NOW About Get It Now Opening an application Press to select Yes to enable security Connecting to the Internet Using Mobile WebDisabling an application Information can be obtained by pressing to open System InfoGetting Help Customer Support Page Copyright 2008 ecom instruments GmbH