Vonage IP8100 manual Installation Directions, Installation Without a Router

Getting Started

Installation Directions

Installation Without A Router

INTERNET

DSL or Cable Modem

PC

Handset 1 & 2

PC/LAN Port

WAN Port

Base Unit

NOTE: The IP8100 series telephone is expandable up to a total of 4 handsets. Uses model IP811 (sold separately)

Warning: Do not route the Ethernet cable to outdoors, and ensure that you are using a safety approved DSL or Cable modem with proper electrical isolation.

STEP 1

Unplug the power cord from your Cable or DSL modem (the device your ISP provided which provides high-speed Internet). Make sure that you turn your computer off and that you do NOT plug in your IP8100 series broadband telephone until instructed to do so.

Helpful Hint: The modem should be powered off for at least 10 minutes. If it is turned off for a shorter period of time, it may remember old information that will prevent it from working properly.

STEP 2

Disconnect all cables between your Cable or DSL modem and your computer.

4