Vonage IP8100 manual Dmz

Page 31

Advanced Settings

IP Filters: (Default to On): Click On to enable or Off to disable. This indicates whether the IP filter is initially enabled or disabled when it is created or modi- fied.

Name: Enter a name the IP Filter you are setting up.

Destination IP: Enter the private IP address that will be affected by the filter. If left blank, any computers on your LAN will be blocked the Internet access.

Port: Enter a single port or a range of ports that will be denied Internet access. (Leave this field blank to deny access to all ports.)

Protocol Type: Choose a protocol type to block.

When finished, click Apply to add the new filter which is then listed under the IP Filter Table.

DMZ

DMZ (Demilitarized Zone) is a feature that exposes a designated computer on your local network to the Internet. The computer designated as the DMZ host is not affected by other security measures. Use this option with caution. Computers designated as DMZ may be vulnerable to security risks.

DMZ: (Default Off) Click On to allow unrestricted Internet access to designated computers.

IP Address: Enter the IP address of a computer to be exposed to the Internet access. When you are finished, click Apply to save the page settings.

Click Apply to save the page settings. Clicking Cancel aborts any changes you have made on the page.

Advanced Settings

29

Image 31
Contents Page Table Of Contents Before you begin Getting StartedGPL License Information Package Contents Installation Without a Router Installation DirectionsDSL Users Cable UsersInstallation Directions Installation With a Router Installation Directions Installation With a Modem Router Installation Directions Setup Wizard Setup Wizard PPPoE Internet Connection TypeType WAN Dynamic IP AddressDynamic IP Address Screen PPPoE Screen Set Static IP Address Screen Setup Completed Screen Test your connections Menu Structure Logout Admin SettingsISP Connection Settings Dynamic IP Address Basic SettingsSetup Wizard Screen ISP Connection Settings ScreenBasic Settings ISP Connection Settings PPPoE Basic Settings ISP Connection Settings Static IP Address Basic Settings Advanced Settings Advanced Settings IP Filters FiltersDMZ Settings Admin SettingsDhcp Screen Local NetworkUniversal Plug and Play Remote Web ManagementDhcp Client Table Dhcp ServerUser Management PasswordsOther Options Ping Test Restore Router Settings Restore SettingsRestart The Broadband Telephone Internet Connection WAN Information Status ScreensBroadband Telephone Information Broadband Telephone LAN InformationActivity Logs Traffic Statistics Dhcp Client Help Glossary AuthenticationBroadband MAC Address FirmwareHost Name IP AddressSubnet Mask PPPoEProtocol ServerVoIP Virtual ServersTroubleshooting Win2k/XP Win98/MEHighlight Internet Protocol TCP/IP and click Properties Win2k/XP Go to Start Run and enter cmd. Click OK Win98/ME Go to Start Run and enter winipcfg. Click OKTroubleshooting Technical Specifications Certification DimensionPower Operating TemperatureIndex Admin Settings Advanced Settings