Notes:
• Four volume levels are available (level 1 to level 4); the default setting is the highest at level 4.
• Your home phone(s) may have a separate volume level setting function that is independent of the Wireless Home Phone base.
Powering On/Off
The On/Off switch is used to turn your Wireless Home Phone base on or off. When powered off, the Wireless Home Phone base will no longer send or receive calls, but it will continue to charge the battery if still connected to the wall outlet.
To turn the Wireless Home Phone base on, slide the On/Off switch to the On position. To turn it off, slide the On/Off switch to the Off position.
AT&T 3G MicroCell
The Wireless Home Phone base can be used with the AT&T 3G MicroCell when it’s within range of the MicroCell signal and the phone number associated with the Wireless Home Phone base has been added to the MicroCell’s approved user list. To update your approved user list, visit att.com/3GMicroCell and click “Manage Settings.”
The Wireless Service indicator on your Wireless Home Phone base will flash green when connected to the MicroCell.
TTY Support
TTY (Text Telephony) and TDD (Telecommunications Device for the Deaf) are supported by the Wireless Home Phone base. In order to use the TTY network, you must have a
Dial *983*889*n# to set the TTY mode.
• n = 0: TTY off mode. The standard voice speaking mode and listening mode. This is the default setting.
• n = 1: TTY full mode. Transmit and receive the TTY characters.
• n = 2: VCO mode. Receive TTY characters but transmit by speaking into the speaker.
• n = 3: HCO mode. Transmit TTY characters but receive by listening to the receiver.
16 | Using Your Device | Using Your Device | 17 |