ArtDio IPF2002PoE ．Fixed IP setting, ．PPPoE setting, ．Bridge, ．Nat, ．Primary DNS, ．Secondary DNS

IPF2002PoE User’s Manual/使用手冊

	2．Fixed IP setting	IP address：set fixed IP address
		Network mask: set subnet mask IP address
		Default Gateway IP：set gateway IP address
	3．PPPoE setting	PPPoE setting：
		User name：Enter PPPoE user ID
		Password：Enter PPPoE password
4.4.2 LAN Setup
	1．Bridge	ON/OFF Bridge function
	2．NAT	ON/OFF Router function
4.4.3 DNS
	1．Primary DNS	Mostly DNS Setting
	2．Secondary DNS	Secondary DNS Setting
4.4.4 VLAN
	1．Activation	ON/OFF VLAN function
	2．VID	Default is 136, Virtual LAN Server setting , VLAN Identifier (Virtual LAN ID. Name
		VLAN ID or VID).

4.4.5 Status

To check the IP phone for the IP address and MAC number.

4.4.6 LAN Speed

1．Auto			Automatically adjust LAN speed
2．100M		Full	Set up 100M full LAN speed
3．100M		Half	Set up 100M half LAN speed
4．10M	Full		Set up 10M full LAN speed
5．10M	Half		Set up 10M half LAN speed

4.5 SIP setting

If the need for the Setting ,Please firstly Enter “System Authent＂ Submenu of ＂Administrator＂, Input Password (pre-set value is the test) if the incorrect password, LCD display "incorrect", correct password LCD display "Correct." When the password was confirmed and then user could SIP set.

17