Sharp CD-DP900E operation manual To locate the beginning of a track, To locate the desired portion

Page 17

￿To locate the beginning of a track

To move to the beginning of the next track:

￿Press the / button for less than 0.5 seconds during playback.

You can skip to any track by pressing the / button repeatedly until the de- sired track number appears.

To restart the track being played:

￿Press the / button for less than 0.5 seconds during playback.

You can skip to any track by pressing the / button repeatedly until the de- sired track number appears.

Notes:

￿You can locate the beginning of a track on a single disc only.

The / or / button on the remote control allows you to locate the begin- ning of a track.

￿To locate the desired portion

For audible fast forward:

Press and hold down the / button during playback.

For audible fast reverse:

Press and hold down the / button during playback.

Notes:

Normal playback will resume when the / or / button is released. You can locate the desired portion on a single disc only.

When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track

￿is reached during fast reverse, the unit will enter the playback mode.

The / or / button on the remote control allows you to locate the desired portion.

CD-DP900E

￿Starting playback with a desired track

You can play a disc starting with the desired track.

1 Whilst in the stop mode, press the DISC SKIP button to select the desired disc.

2 Press the / or / button to select the desired track.

Selected disc number

 

 

 

 

 

 

PlaybackCD

-

Selected track number

 

 

 

 

(CDs)CDatoListening

 

 

 

 

 

 

You can also select a track by pressing the

/

or

/

button on the

 

 

remote control.

 

 

 

 

 

 

 

3 Press the / (

) button to start playback.

 

 

 

 

Playback of the selected track is started. When the end of last track of the disc

 

 

selected is reached, the next disc will be automatically started.

 

 

 

Note:

 

 

 

 

 

 

 

When the DISC SKIP button is pressed during playback, the next disc will begin auto-

 

 

matically.

 

 

 

 

 

 

 

Caution:

 

 

 

 

 

 

-

Do not place two CDs in one disc tray.

Do not play discs with special shapes (heart- or octagon-shaped). It may cause malfunctions.

Do not push the disc tray whilst it is moving.

Do not turn the disc tray by hand. This may cause malfunctions.

If the power fails whilst the tray is open, wait until the power is restored.

If the disc tray is stopped forcibly, "ER-CD10" will appear on the display for 3 sec- onds and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again.

If TV or radio interference occurs during CD operation, move the unit away from

￿the TV or radio.

If a disc is damaged, dirty, or loaded upside down, the disc will skip.

17

02/1/8 CD-DP900E(UK)_2.fm

Image 17
Contents CD-DP900E Special notes Special notesContents Volume control PrecautionsCal Sharp service facility GeneralGeneral Information Precautions / Accessories AccessoriesRemote control AM loop aerial FM aerial Care of compact discsIndicators Controls and indicatorsFront panel ControlsAC Power Lead Transport Screw Sleep IndicatorDisplay Rear panelFull-Range Speaker Speaker Wire Information and indicatorsFront speaker Centre speakerCD Track Up or Fast Forward Button CD Clear ButtonCD Random Button Removing the transport screw System connectionsAerial connection Placing the speaker system Speaker connectionMake a hole in the wall using a HeadphonesPreparation for Use System connections DrillDemonstration mode Remote controlTo turn the power on Battery installationEqualiser CD-DP900ESound controlExtra bass X-BASS/Pre-programmed Basic Operation Setting the clock Setting the clockTo readjust the clock To confirm the time displayCD Playback Listening to a CD CDs Listening to a CD CDsStarting playback with a desired track To locate the beginning of a trackTo locate the desired portion Programmed play Repeat playRandom play Auto tuning TuningListening to the radio Radio Listening to the radioTo erase entire preset memory To scan the preset stationsPreset channel Tuning SeeTape Playback Listening to a cassette tape Tape 1 or Tape Listening to a cassette tape Tape 1 or TapeFast forward/rewind Tape 2 only Press the Tape buttonTape Recording Recording to a cassette tape Recording to a cassette tapeRecording from a CD CDs Dubbing from tape to tape Recording from the radioErasing recorded tapes Press the / Tape 2 button to start dubbing To stop dubbingEnjoy the surround sound Phantom modeAdvanced Features Enjoy the surround sound To balance the front speakers Normal modeAdvanced Features Timer and sleep operation Timer and sleep operationTimer playback or timer recording Sleep operation Enhancing your system / Troubleshooting chart Troubleshooting chartEnhancing your system CD playerClearing all the memory reset Remote controlCassette deck CondensationSpecifications MaintenanceCleaning the tape-handling parts Cleaning the cabinetSurround speaker SpecificationsA0201.HK Terms of Guarantee