6 Press the TUNING/TIME (
or 
) button to specify the minutes, then press the MEMORY/SET button.
7 The unit will enter the timer
To cancel the timer playback/timer recording:
Press the
8 When the preset time is reached, playback or recording will start.
The volume will increase gradually until it reaches the volume you were listening at before your system enters the timer
9 In timer playback:
If you select CD or TAPE, the unit will enter the
In timer recording:
When the recording tape reaches its end, the timer recording will end, and the unit will enter the
To reset or change the timer setting:
Perform "Timer playback or timer recording" from the beginning.
Notes:
Once the time is set, the setting will be retained until a new time is entered. When performing timer playback or recording using another unit connected to the VIDEO/AUX sockets, select "VIDEO/AUX" in step 2.
At this time, only this unit will be turned on or enter the power
Sleep operation
1 Play back the desired sound source.
2 Press the TIMER/SLEEP button repeatedly until "SLEEP" is dis- played.
To change the sleep time:
Whilst the sleep time is displayed, press the TUNING/TIME (
or 
) button.
(Maximum: 3 hours - Minimum: 1 minute)
3 hours - 5 minutes 
3 Press the MEMORY/SET button.
4 Your system will enter the power
The volume will be turned down 1 minute before the sleep operation finishes.
To cancel the sleep operation:
Press the
To confirm the remaining sleep time:
Press the TIMER/SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 5 seconds.
Note:
Once the sleep time is set, it will remain unchanged until a new time is entered.
Advanced Features - Timer and sleep operation -
27