Listening to a cassette tape (TAPE 1 or TAPE 2)
Before playback:
For playback, use normal or 
tapes are not recommended.)
Do not use 
Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil.
Playback is possible in TAPE 1 compartment as well as in TAPE 2.
1 Press the
2 Open the cassette door by pushing the area marked "
PUSH EJECT".
3 Load a cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you.
TAPE 1 | TAPE 2 |
4 Press the TAPE (1 
2) button to select the cassette you want to listen to.
5 Press the 
/
button to start playback.
When playback is performed using the remote control, press the TAPE 1 or TAPE 2 
button.
To stop playback:
Press the 
(TAPE 
) button.
Fast forward/rewind: (TAPE 2 only)
1 Press the 
(TAPE 
) button, then press the TAPE (1 
2) button to select TAPE 2.
2 To advance the tape, press the 
/ 
(
) button. To rewind it, press the 
/ 
(
) button.
Caution:
To remove the cassette, press the 
(TAPE 
) button, and then open the compartment. Before changing from one tape operation to another, press the 
(TAPE 
) button.
If a power failure occurs during tape operation, the tape head will remain engaged with the tape and the cassette door will not open. In this case, wait until the power is restored.
Tape Playback - Listening to a cassette tape (TAPE 1 or TAPE 2) -
Sound control (See page 14.)
21
02/1/8